Before using
12
LSQT1181
(34) Tripod receptacle
This is a hole for attaching the Camcorder to
optional tripod. (Please carefully read the
operating instructions for how to attach the tripod
to the Camcorder.)
≥You cannot open the card slot cover when the
tripod is used. Insert the card first and then
attach the tripod.
Attaching the lens cap
Fit the lens cap to protect the surface of the lens.
≥The lens cap and the lens cap cord come pre-
attached to the grip belt.
≥When not using the lens cap, pull the lens cap
cord in the direction of the arrow. 1
≥When you are not recording, be sure to cover
the lens with the lens cap for protection. 2
≥When you remove the lens cap, press the knobs
firmly.
The grip belt
Adjust the belt length so it fits your hand.
1Adjust the belt length and the pad position.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
Power supply
ªCharging the battery
When this product is purchased, the battery is not
charged. Charge the battery before using this
product.
≥Battery charging time. (-14-)
≥We recommend using Panasonic batteries.
(-10-, -70-)
≥If you use other batteries, we cannot guarantee
the quality of this product.
≥If the DC cable is connected to the AC adaptor,
then the battery will not get charged. Remove
the DC cable from the AC adaptor.
1Connect the AC cable to the AC adaptor and
the AC jack.
2Put the battery on the battery mount by
aligning the mark and then securely plug it
in.
(34)
2
1
S5650.book 12 ページ ２００６年１２月５日　火曜日　午前１０時５２分