IBM QMS 4525 manual Adjusting the Paper Size Switch

Adjusting the Paper

Size Switch

7Replace the toner bin lid, and push the developing unit back into its home position.

8Pull the green handle toward you, then turn it 180° clockwise until the tab seats into the square hole in the metal handle of the developing unit.

9Close the front door.

Adjusting the Paper Size Switch

If you have the stacker/stapler installed, a device in the upper output bin taps printed sheets into a neat stack. For this to work properly, the paper-size switch must be set to the correct paper size. The switch has three positions:

Left Foolscap (8.0", 203 mm)

Quartol (8.0”, 203 mm)

Center A4 (8.3", 210 mm)

Commercial (8.3", 210 mm)

Folio (8.3", 210 mm)

Right Letter (8.5", 216 mm)

Letter Large (8.5", 216 mm)

Legal Small (8.5", 216 mm)

When you load paper into the input bins, check the paper size switch setting to ensure that it is set properly. If you load paper of different sizes in the two input bins, set the switch to the widest size.

3DSHU￿VL]H￿

6ZLWFK

4-12 QMS 4525 Print System User's Guide

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500