Husqvarna 536 LIL Assembly, Fitting the loop handle, Fitting the handlebar, Assembling the guard

ASSEMBLY

Fitting the loop handle

Li-ion

•Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft.

•Slide the spacer into the slot in the loop handle.

•Fit the nut, knob and screw. Do not overtighten.

•Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob.

Fitting the handlebar

Li-ion

•Position the handlebar as shown. Fit the mounting components and tighten the knob lightly.

•Put on the harness and hang the machine from the support hook. Now make a final adjustment so that the machine is in a comfortable working position when it hangs from the harness.

•Tighten the knob.

Assembling the guard

Li-ion

•Fit the correct trimmer guard (A) for use with the trimmer head.

2

1

A

•Hang the trimmer guard on the hook on the plate holder (1). Bend the guard around the shaft and tighten it with the bolt (2) on the opposite side of the shaft.

Adjusting the harness and trimmer

!	WARNING! When using a trimmer it must
	always be hooked securely to the
	harness. Otherwise you will be unable to
	control the trimmer safetly and this can
	result in injurytp yourselfor others. never
	use a harness with a defectivequick
	release.

English – 13