MAINTENANCE
Troubleshooting schedule
Troubleshooting takes place from the keypad.
Keypad
Control panel | Possible faults | Possible action | |
|
|
| |
Green activate LED flashing. | Low battery voltage. | Charging the battery | |
|
|
| |
| The power trigger and the activate | Release the power trigger and the | |
| button are pressed at the same | ||
| machine is active. | ||
| time. | ||
|
| ||
|
|
| |
Error LED flashes. |
| The trimmerhead is jammed. | |
| Remove the battery from the | ||
| Overload. | ||
| machine. Release the trimmer | ||
|
| ||
|
| head from grass. | |
|
|
| |
| Temperature deviation. | Allow the machine to cool down. | |
|
|
| |
The machine will not run | Dirt in battery connectors. | Clean with compressed air or a soft | |
brush. | |||
|
| ||
|
|
| |
Error LED is lit with red light. | Service | Contact your service agent. | |
|
|
|
Troubleshooting the battery and/or the battery charger during charging.
Battery
LED display | Possible faults | Possible action |
|
|
|
Green activate LED flashing. | Low battery voltage. | Charge the battery |
|
|
|
| The battery is discharged. | Charge the battery |
|
|
|
|
| Use the battery in surroundings |
| Temperature deviation. | where temperatures are between - |
|
| 10 °C and 40 °C. |
Error LED flashing. |
|
|
| Check that the mains voltage | |
|
| |
|
| corresponds with that stated on the |
| Over voltage. | rating plate on the machine. |
|
| Remove the battery from the |
|
| battery charger. |
|
|
|
Error LED is lit. | Cell difference too much (1V). | Contact your service agent. |
|
|
|
Battery charger |
|
|
LED display | Possible faults | Possible action |
|
|
|
|
| Use the battery charger only when |
Error LED flashing. | Temperature deviation. | the surrounding temperature is |
|
| between 5 °C and 40 °C. |
|
|
|
Error LED is lit. |
| Contact your service agent. |
|
|
|
22 – English
