Husqvarna 536 LIL Battery Handling, Battery charger, Connect the battery charger, Charging status

BATTERY HANDLING

Battery

The display shows the battery capacity and if there are any problems with the battery. The battery capacity is displayed for 5 seconds after the machine is switched off or the battery indicator button is pressed. The warning symbol on the battery is lit when an error has occurred. See fault codes.

1 2 3 4

LED lights	Battery
All LEDs are lit	Fully charged (75-100%).
LED 1, LED 2, LED 3 are	The battery is 50%-75%
lit.	charged.
LED 1, LED 2 are lit.	The battery is 25%-50%
	charged.
LED 1 is lit.	The battery is 0%-25%
	charged.
LED 1 flashes	The battery is empty.
	Charge the battery.

Battery charger

!	WARNING! Risk of electric shock and
	short circuiting. Use approved and intact
	wall sockets. Make sure that the cable is
	not damaged. Replace cable if it appears
	to be damaged in any way.

Connect the battery charger

•Connect the battery charger to the voltage and frequency specified on the rating plate. Put the electric plug in the wall socket.The LED on the battery charger flashes green once.

•The battery will not be charged if the battery temperature is over 50 °C. In that case the battery charger will actively cool down the battery.

Connect the battery to the battery charger

Regularly check that the battery charger and the battery are intact. See also instructions under the Maintenance heading.

The battery must be charged before using it the first time. The battery is only 30% charged when delivered.

•Put the battery in the battery charger. Make sure that the battery is connected to the battery charger.

•The green charging light is lit when the battery is connected to the battery charger.

•When all LEDs are lit the battery is fully charged.

1 2 3 4

•Pull out the plug. Never jerk the power supply cable to disconnect it from the wall socket.

•Remove the battery from the battery charger.

Charging status

Lithium-ion batteries can be charged whatever their charge level. The charging process can be cancelled or started whatever the battery's charge level. The battery is not damaged. A fully charged battery will not lose its charge even when the battery is left in the charger.

The battery will not be charged if the battery temperature is over 50 °C.

1 2 3 4

LED display	Charging status
LED 1 flashes	The battery is 0%-25%
	charged.
LED 1 is lit, LED 2	The battery is 25%-50%
flashes.	charged.
LED 1, LED 2 are lit, LED	The battery is 50%-75%
3 flashes	charged.
LED 1, LED 2, LED 3 are	Battery is 75%-100%
lit, LED 4 flashes	charged
LED 1, LED 2, LED 3,	When all the LEDs are lit
	on the battery, it is fully
LED 4 are lit.
	charged.

English – 15