STARTING AND STOPPING
Check before starting
•Check the motor for dirt and cracks. Clean off grass and leaves from the engine using a brush. Gloves should be worn when necessary.
•Check that the trimmer head is completely attached to the trimmer.
•Check that the machine is in perfect working order. Check that all nuts and screws are tight.
•Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked.
•Never use the machine without a guard nor with a defective guard.
•All covers must be correctly fitted and undamaged before you start the machine.
•Only use the machine for the purpose it was intended for.
Connect battery to the machine
Make sure to use fully charged batteries. Use only a Husqvarna original battery in your machine. See technical data.
•Insert the battery in the machine. The battery should slide easily into the battery holder on the machine. If the battery does not slide in easily, it is not being inserted correctly. The battery will lock itself into place when you hear a click. Make sure the battery is fitted correctly to the machine.
Starting and stopping
! | WARNING! Make sure no unauthorised | |
persons are in the working area. | ||
| ||
| Otherwise there is a risk of serious | |
| personal injury. The safety distance is 15 | |
| metres. |
Starting
Turn on the machine. Press and hold the start button (>1 sec.) until the green LED is lit.
Use the power trigger to control the speed.
Stopping
Stop the machine by releasing the power trigger or the power trigger lockout and deactivate the machine.
Remove the battery from the machine by pressing the two release buttons and pulling out the battery.
IMPORTANT! Always remove the battery to prevent the machine being started by accident.
English – 17
