Special Functions A
By pressing Afollowed by the appropriate key, (do not press simultaneously) these special functions and features can be enabled:
A0Easy Arm (when system is disarmed)
The Easy Arm feature allows the system to be armed by pressing A followed by 0. This will allow the easy arm-
ing of the system by someone who is not a regular system user.
A0Easy Exit (when system is armed)
This function (if programmed) allows an occupant to leave the premises without disarming the system. Pressing A fol-
lowed by 0 while the system is armed will start a 3 minute
period, during which you can leave through the Exit/ Entry door.
A1Bell / Battery Test
Pressing Afollowed by 1will cause the bell, or siren to
sound for 2 seconds. This will also initiate a test of your bat- tery to make sure it is adequately charged. The
A3Access Output
If programmed, pressing Afollowed by 3will activate the
Access Output which may be configured to open a door strike, turn on lighting, or activate some other special feature your installer has provided.
A4Instant Mode
Pressing Afollowed by 4will cancel the Entry delay and
put the system into the “Instant” mode. This is typically used in the evening when all family members are home for the night. When the system is disarmed, the Instant mode will be canceled.
A5Chime Mode On / Off
Pressing A followed by 5 will activate / deactivate the
door chime. Activating this feature will cause any door to beep the keypad sounder when it is opened.
A8Program Mode
Pressing A followed by 8 will enable the “Program
Mode”, which will allow you to program and erase user codes. (see Programming user codes, page 14)
A9Keypad Sounder On / Off
Pressing A followed by 9 will deactivate / activate the
keypad sounder, depending on its present state. By activating sleep mode on a keypad installed in a bedroom, for example, you effectively turn off that keypad’s sounder. However, any other keypads on the system will still sound normally.
11