Napco Security Technologies XP-600 manual Important Test Your System Weekly, Table of Contents

Introduction

TABLE OF CONTENTS
Keypad Controls and Indicators	4
Arming your System (When Leaving)	5
Protecting Yourself While Home	6
Emergency Keys	7
Disarming the System	8
Silencing an Alarm	8
Resetting a Fire Alarm	8
Fire Protection	9
Special Functions	11
System Troubles	12
Programming User Codes	14
Glossary	15

SYSTEM INFORMATION

Central Station Phone Number: ____________________

Central Station Account Number: ____________________

For Service Call: ____________________

Entry Delay: ____________________

Exit Delay: ____________________

Alarm Time-out: ____________________

Important - Test Your System Weekly !

1Bell / Battery Test

Test your bell or siren by pressing Gfollowed by 1.

This will cause the bell, or siren to sound for 2 seconds and also initiate a test of the battery.

2Central Station Communication Test

(This test should only be performed on weekends or at a time designated by your alarm company)

1.Notify Central Station of the impending test.

2.Secure all zones to light the WLight on your keypad.

3.Enter your user code to Arm the system.

4.Violate your alarm by opening a window / door etc.

5.The siren or bell should sound and the system will send the alarm signals to the Central Station.

6.Enter your user code to silence the bell or sounder.

7.Call Central Station to insure that the alarm signals were received properly.

3