Napco Security Technologies XP-600 manual Emergency Conditions, Emergency Buttons, Ambush Alarm

Emergency Conditions

EFire

eEmergency Enabled?

Yes

FAuxiliary

FEmergency Enabled?

Yes

GPolice

GEmergency Enabled?

Yes

Ambush

Alarm

Enabled?

Yes

Emergency Buttons	EFG
	EFG

The three sets of emergency buttons, if programmed, are always active whether the system is armed or disarmed. Discuss these Buttons with your installer. The emergency signal will only be activated when the two respective buttons are pressed at the same time.

Fire Alarm: Simultaneously press E+Eto sound a fire alarm, and to alert the central station of a fire emergency, if so programmed.

Auxiliary Alarm: Simultaneously press F+Fto alert the central station of an auxiliary emergency, if so programmed. (The nature of this emergency alarm is to be determined by the installer)

Police Emergency: Simultaneously press G+G to sound a police emergency alarm, and to alert the central station of a fire emergency, if so programmed.

Ambush Alarm

In the event that you are forced by an intruder to disarm your system, the "ambush alarm" can be acti- vated. Disarming the system with the Ambush Code will cause the system to appear to disarm nor- mally--however, a silent ambush alarm signal will be sent to the Central Station. If your system has the Ambush feature enabled, the code assigned as the User 6 code will function as your Ambush Code.

7