Incorrect Password, USE AC Adapter, Update Corrupted | JVC GV-LS2 U

Information

	Message	Check	Refer to

		• The two passwords entered on the change password
	INCORRECT PASSWORD	screen are different. Enter the same password in the	–
		two fields.

	USE AC ADAPTER	• When updating the firmware, connect the AC adapter.	page 12

	NO UPDATES AVAILABLE	• Check if the update file is written in the correct folder	–
	NO UPDATES AVAILABLE	on the SD card.	–
		on the SD card.

	UPDATE CORRUPTED	• Retrieve the firmware update file, and copy it to the SD	–
	UPDATE CORRUPTED	card.	–
		card.

	INSTALLED UPDATE ON THIS	• Obtain the updater for the unit.	–
	CAMERA CAN NOT BE USED	• Obtain the updater for the unit.	–
	CAMERA CAN NOT BE USED

	UPDATE IS SAME OR OLDER	• The firmware has already been updated. There is no
	VERSION. NO INSTALLATION	• The firmware has already been updated. There is no	–
	VERSION. NO INSTALLATION	need to update it.	–
	REQUIRED	need to update it.
	REQUIRED

	POWER TURNED OFF TO	• The power is automatically turned off if "AUTO POWER
	POWER TURNED OFF TO	OFF" is set to "ON", the unit runs with the battery, and	page 46
	CONSERVE BATTERY POWER	OFF" is set to "ON", the unit runs with the battery, and	page 46
	CONSERVE BATTERY POWER	no operation is performed for 5 minutes.
		no operation is performed for 5 minutes.

	(12 HOURS LIMITATION)	• Recording stops automatically as it cannot be	–
	RECORDING CANCELLED	performed for 12 or more consecutive hours.	–
	RECORDING CANCELLED	performed for 12 or more consecutive hours.

	ABNORMALITY OCCURRED IN	• Turn on the power again, and retry.	page 7
	PAN TILTER	• Turn on the power again, and retry.	page 7
	PAN TILTER

	POWER TURNED OFF AS
	CAMERA TEMPERATURE IS TOO	• Wait for a while, and turn on the power again.	page 6
	HOT

	PROCESS FAILED	• Setup, file deletion, etc. failed for some reason. Check	–
	PROCESS FAILED	the connection, and retry.	–
		the connection, and retry.

54

Image 54

JVC GV-LS2 U manual Incorrect Password, USE AC Adapter, No Updates Available, Update Corrupted, Installed Update on this

Contents

GV-LS2 Table of Contents Connecting an External Mic Connecting the AV CordNetwork CAMERA/PAN Tilter Manage Verifying the Accessories Component Names and Functions CameraFront Back Introduction Top Bottom Pantilter FrontBottom Back Setting Use Example 3 Live-stream a performance in a studio SetupExample 2 Record birds coming to a feeder on the balcony Addition Flow of Connection/Setup Starting shooting Connecting the Camera to Your Computer Required operating environmentAttach the LAN cable to the unit Connecting the AC Adapter Subnet Mask Configuring the initial settingsIP Address List Http//condigured IP address8000 Configuring the Camera Settings Adjusting the clockSelect Common Settings in Manage Change Administrator USER/PASSWORD Setting the user name and passwordClick the Update button on the right Enter USERNAME, PASSWORD, and Password Confirm MPEG-2 TS 1920x1080/MotionJPEG Select Stream Settings in NetworkMPEG-2 TS 720x576/MotionJPEG Select an option from MAX Frame Rate MotionJPEG Setting up the Ddns account Select Monitoring Settings in NetworkObtaining a Ddns account Adding a camera drivers user Click the ADD button Changing the Connection Destination Establishing a wired connection to the access pointDefault Gateway Subnet Mask Searching and connecting to the access point Connecting to the access point wirelessly Wi-FiUsing the WPS function Select Wireless Network in Network Connecting manually Enter Password Click the Save button Connecting to a computer directly Wi-Fi Direct Connecting Multiple Cameras Click the Save button Select Common Settings in Manage Push the camera straight down Attaching the PantilterAttaching the Pantilter Screw and fix the camera Remove all tape from the pantilter Connecting the AC adapterRemoving the pantilter Loosen the camera fixing screw sufficiently Attach the LAN cable to the unit in numerical order Establishing a wired connectionAttach the conversion cable to the stopper of the LAN cable Connect the camera to your computer via the LAN cable Removing Inserting/Removing an SD CardInserting Compatible SD cards Charging Attaching/Removing the BatteryAttaching Approximate charging times Connecting to the pantilter Connecting an External MicConnecting to the camera Attaching to the hot shoe Connecting the AV Cord Using the Unit Alone Turning on/off the powerStarting/Stopping recording Controlling from a Web Browser LoggingClick the LOG in button File Management Controlling the camera Monitor tabMonitor Status Reload button Update images Setting button Zoom ratioSD card Configuring the camera settings Transfer Managing files stored on the SD card File Management tabUse Folder/File lists Delete Network Checking the message history Status tabCamera LOG in User Installing JVC CAM Control Streaming images Using the Mobile Terminal Installing the App for mobile terminalsNames of Apps for mobile terminals Wireless Network Setting Item ListWired Network Information Registered Access Point PasswordSSID, Authenticate METHOD, Password UPnP Monitoring SettingsPort Number Ddns Stream Settings Stream 1 / StreamMAX Frame Rate MotionJPEG Camera Settings PAN Tilter Settings Common Settings Media Management Power cannot be turned on remotely Turn OFF Camera Troubleshooting Problem Check Refer toConnection Setup URLDirect Information Use Information Error messages Message Check Refer to Update Corrupted Incorrect PasswordNo Updates Available Installed Update on this Power WPS PowerLamp Status List Click the Exec button on the right Resetting to the factory settingsDeleting Resetting the connection information To execute, click the Exec button Updating the firmware Battery Pack optionalTo prevent damage and prolong service life To avoid hazards Camera SpecificationsConnectors Video Pantilter GV-LS2WUP Stream output formatAC adapter UIA324-12 MPEG-2 TS JVC Kenwood Corporation 0812HO-MW-VM