Configuring the initial settings, IP Address, List | JVC GV-LS2 U

Configuring the Camera Settings Appropriate for Your Needs

Access the unit from your computer to set the network, streaming, etc.

Required operating environment

Browser: Internet Explorer 9 or later

Configuring the initial settings

To configure the settings for the first time after purchase, connect the camera directly to your computer via a LAN cable.

1Connect the camera to your computer via the LAN cable. ( ➭ page 11)

2Press and hold the power button to power on. The record button starts blinking. Wait until it stops blinking and off.

3Configure the network settings for the computer as follows:

•IP ADDRESS

Other than 192.168.1.100 within the range of 192.168.1.2 to 192.168.1.254

(Example) 192.168.1.23

•SUBNET MASK 255.255.255.0

CAUTION

To restore the settings of your computer after confirming the performance and completing the settings, write down the current settings before changing them.

4Start Internet Explorer, and enter "http://192.168.1.100:8000" in the address bar.

5Enter the user name and password of the administrator.

Initial setting: USERNAME "root", PASSWORD "password".

If login is successful, the setup screen appears.

•To configure the settings only to start using the unit, refer to "Configuring the Camera Settings" (page 15), "Selecting a Format of Images

to be Output/Saved" (page 17), "Allowing You to Connect from Outside (Monitoring Setting)" (page 18), "Changing the Connection Destination" (page 20).

•To confirm all the settings, refer to "Setting Item

List" (page 41).

Preparation

13

Image 13

JVC GV-LS2 U manual Configuring the initial settings, IP Address, Subnet Mask, List

Contents

GV-LS2 Table of Contents Connecting the AV Cord Connecting an External MicNetwork CAMERA/PAN Tilter Manage Verifying the Accessories Camera Component Names and FunctionsFront Back Bottom Introduction Top Front PantilterBottom Back Use Setting Example 2 Record birds coming to a feeder on the balcony SetupExample 3 Live-stream a performance in a studio Addition Starting shooting Flow of Connection/Setup Required operating environment Connecting the Camera to Your ComputerAttach the LAN cable to the unit Connecting the AC Adapter IP Address Configuring the initial settingsSubnet Mask List Http//condigured IP address8000 Adjusting the clock Configuring the Camera SettingsSelect Common Settings in Manage Click the Update button on the right Setting the user name and passwordChange Administrator USER/PASSWORD Enter USERNAME, PASSWORD, and Password Confirm MPEG-2 TS 720x576/MotionJPEG Select Stream Settings in NetworkMPEG-2 TS 1920x1080/MotionJPEG Select an option from MAX Frame Rate MotionJPEG Select Monitoring Settings in Network Setting up the Ddns accountObtaining a Ddns account Click the ADD button Adding a camera drivers user Default Gateway Establishing a wired connection to the access pointChanging the Connection Destination Subnet Mask Using the WPS function Connecting to the access point wirelessly Wi-FiSearching and connecting to the access point Select Wireless Network in Network Enter Password Click the Save button Connecting manually Connecting to a computer directly Wi-Fi Direct Click the Save button Select Common Settings in Manage Connecting Multiple Cameras Attaching the Pantilter Attaching the PantilterPush the camera straight down Screw and fix the camera Removing the pantilter Connecting the AC adapterRemove all tape from the pantilter Loosen the camera fixing screw sufficiently Attach the conversion cable to the stopper of the LAN cable Establishing a wired connectionAttach the LAN cable to the unit in numerical order Connect the camera to your computer via the LAN cable Inserting Inserting/Removing an SD CardRemoving Compatible SD cards Attaching Attaching/Removing the BatteryCharging Approximate charging times Connecting to the camera Connecting an External MicConnecting to the pantilter Attaching to the hot shoe Connecting the AV Cord Turning on/off the power Using the Unit AloneStarting/Stopping recording Logging Controlling from a Web BrowserClick the LOG in button Monitor Controlling the camera Monitor tabFile Management Status Zoom ratio Reload button Update images Setting buttonSD card Configuring the camera settings Use Folder/File lists Managing files stored on the SD card File Management tabTransfer Delete Camera Checking the message history Status tabNetwork LOG in User Streaming images Installing JVC CAM Control Installing the App for mobile terminals Using the Mobile TerminalNames of Apps for mobile terminals Wired Network Setting Item ListWireless Network Information Password Registered Access PointSSID, Authenticate METHOD, Password Port Number Monitoring SettingsUPnP Ddns Stream 1 / Stream Stream SettingsMAX Frame Rate MotionJPEG PAN Tilter Settings Camera Settings Media Management Common Settings Turn OFF Camera Power cannot be turned on remotely Problem Check Refer to TroubleshootingConnection URL SetupDirect Information Use Information Message Check Refer to Error messages No Updates Available Incorrect PasswordUpdate Corrupted Installed Update on this WPS Power PowerLamp Status List Deleting Resetting the connection information Resetting to the factory settingsClick the Exec button on the right To execute, click the Exec button To prevent damage and prolong service life Battery Pack optionalUpdating the firmware To avoid hazards Connectors SpecificationsCamera Video AC adapter UIA324-12 Stream output formatPantilter GV-LS2WUP MPEG-2 TS JVC Kenwood Corporation 0812HO-MW-VM