Using the Unit Alone, Turning on/off the power | JVC GV-LS2 U

Using the Unit Alone

Insert an SD card and attach the battery, so you can carry and use the unit as a normal video camera. Set whether to save recorded videos to the SD card or stream them wirelessly. ( ➭ page 41)

Use

32

Turning on/off the power

Turning on the power

Press and hold the power button.

The record button starts blinking. Wait until it stops blinking and off.

Turning off the power

Press and hold the power button again. The power button turns off.

Starting/Stopping recording

Starting recording

Press the record button. The record button blinks.

The button blinks quickly for 2 seconds if recording cannot start. Check the SD card or unit settings.

Stopping recording

Press the record button again.

The record button turns off.

CAUTION

•The power is automatically turned off if "AUTO POWER OFF" is set to "ON", the unit runs with the battery, and no operation is performed for 5 minutes. ( ➭ page 46)

•Recording stops automatically as it cannot be performed for 12 or more consecutive hours.

Image 32

JVC GV-LS2 U manual Using the Unit Alone, Turning on/off the power, Starting/Stopping recording

Contents

GV-LS2 Table of Contents Network CAMERA/PAN Tilter Manage Connecting an External MicConnecting the AV Cord Verifying the Accessories Front Back Component Names and FunctionsCamera Introduction Top Bottom Bottom Back PantilterFront Setting Use Setup Example 2 Record birds coming to a feeder on the balconyExample 3 Live-stream a performance in a studio Addition Flow of Connection/Setup Starting shooting Attach the LAN cable to the unit Connecting the Camera to Your ComputerRequired operating environment Connecting the AC Adapter Configuring the initial settings IP AddressSubnet Mask List Http//condigured IP address8000 Select Common Settings in Manage Configuring the Camera SettingsAdjusting the clock Setting the user name and password Click the Update button on the rightChange Administrator USER/PASSWORD Enter USERNAME, PASSWORD, and Password Confirm Select Stream Settings in Network MPEG-2 TS 720x576/MotionJPEGMPEG-2 TS 1920x1080/MotionJPEG Select an option from MAX Frame Rate MotionJPEG Obtaining a Ddns account Setting up the Ddns accountSelect Monitoring Settings in Network Adding a camera drivers user Click the ADD button Establishing a wired connection to the access point Default GatewayChanging the Connection Destination Subnet Mask Connecting to the access point wirelessly Wi-Fi Using the WPS functionSearching and connecting to the access point Select Wireless Network in Network Connecting manually Enter Password Click the Save button Connecting to a computer directly Wi-Fi Direct Connecting Multiple Cameras Click the Save button Select Common Settings in Manage Attaching the Pantilter Attaching the PantilterPush the camera straight down Screw and fix the camera Connecting the AC adapter Removing the pantilterRemove all tape from the pantilter Loosen the camera fixing screw sufficiently Establishing a wired connection Attach the conversion cable to the stopper of the LAN cableAttach the LAN cable to the unit in numerical order Connect the camera to your computer via the LAN cable Inserting/Removing an SD Card InsertingRemoving Compatible SD cards Attaching/Removing the Battery AttachingCharging Approximate charging times Connecting an External Mic Connecting to the cameraConnecting to the pantilter Attaching to the hot shoe Connecting the AV Cord Starting/Stopping recording Using the Unit AloneTurning on/off the power Click the LOG in button Controlling from a Web BrowserLogging Controlling the camera Monitor tab MonitorFile Management Status SD card Reload button Update images Setting buttonZoom ratio Configuring the camera settings Managing files stored on the SD card File Management tab Use Folder/File listsTransfer Delete Checking the message history Status tab CameraNetwork LOG in User Installing JVC CAM Control Streaming images Names of Apps for mobile terminals Using the Mobile TerminalInstalling the App for mobile terminals Setting Item List Wired NetworkWireless Network Information SSID, Authenticate METHOD, Password Registered Access PointPassword Monitoring Settings Port NumberUPnP Ddns MAX Frame Rate MotionJPEG Stream SettingsStream 1 / Stream Camera Settings PAN Tilter Settings Common Settings Media Management Power cannot be turned on remotely Turn OFF Camera Connection TroubleshootingProblem Check Refer to Direct SetupURL Information Use Information Error messages Message Check Refer to Incorrect Password No Updates AvailableUpdate Corrupted Installed Update on this Lamp Status List PowerWPS Power Resetting to the factory settings Deleting Resetting the connection informationClick the Exec button on the right To execute, click the Exec button Battery Pack optional To prevent damage and prolong service lifeUpdating the firmware To avoid hazards Specifications ConnectorsCamera Video Stream output format AC adapter UIA324-12Pantilter GV-LS2WUP MPEG-2 TS JVC Kenwood Corporation 0812HO-MW-VM