Adding a camera drivers user, Click the ADD button

Adding a camera driver's user

To access to the unit using the camera driver ( ➭ page 39), you need to set the user name and password beforehand. (Up to four users can be registered.) Initial setting: USERNAME "root", PASSWORD "password".

They should be changed as soon as possible for security reasons.

* Multiple users cannot view simultaneously.

1Select "MONITORING SETTINGS" in "NETWORK".

If the sub settings are not displayed, click "+" on the left of "NETWORK".

2Click the "ADD" button.

•Select a user from "USER (JVC CAM driver)" and click the "UPDATE" button to change the user name and password of the user.

•Select a user from "USER (JVC CAM driver)" and click the "DELETE" button to delete the user.

3Enter "USERNAME", "PASSWORD", and "PASSWORD (CONFIRM)".

Enter 1 to 32 characters for the user name, and 8 to 32 characters for the password. (1 byte alphanumeric characters and symbols only)

4Click the "SAVE" button.

The user has been registered.

Preparation

Page 19

Image 19

JVC GV-LS2 U manual Adding a camera drivers user, Click the ADD button

Contents

GV-LS2 Table of Contents Connecting the AV Cord Connecting an External MicNetwork CAMERA/PAN Tilter Manage Verifying the Accessories Camera Component Names and FunctionsFront Back Bottom Introduction Top Front PantilterBottom Back Use Setting Addition SetupExample 2 Record birds coming to a feeder on the balcony Example 3 Live-stream a performance in a studio Starting shooting Flow of Connection/Setup Required operating environment Connecting the Camera to Your ComputerAttach the LAN cable to the unit Connecting the AC Adapter List Configuring the initial settingsIP Address Subnet Mask Http//condigured IP address8000 Adjusting the clock Configuring the Camera SettingsSelect Common Settings in Manage Enter USERNAME, PASSWORD, and Password Confirm Setting the user name and passwordClick the Update button on the right Change Administrator USER/PASSWORD Select an option from MAX Frame Rate MotionJPEG Select Stream Settings in NetworkMPEG-2 TS 720x576/MotionJPEG MPEG-2 TS 1920x1080/MotionJPEG Select Monitoring Settings in Network Setting up the Ddns accountObtaining a Ddns account Click the ADD button Adding a camera drivers user Subnet Mask Establishing a wired connection to the access pointDefault Gateway Changing the Connection Destination Select Wireless Network in Network Connecting to the access point wirelessly Wi-FiUsing the WPS function Searching and connecting to the access point Enter Password Click the Save button Connecting manually Connecting to a computer directly Wi-Fi Direct Click the Save button Select Common Settings in Manage Connecting Multiple Cameras Screw and fix the camera Attaching the PantilterAttaching the Pantilter Push the camera straight down Loosen the camera fixing screw sufficiently Connecting the AC adapterRemoving the pantilter Remove all tape from the pantilter Connect the camera to your computer via the LAN cable Establishing a wired connectionAttach the conversion cable to the stopper of the LAN cable Attach the LAN cable to the unit in numerical order Compatible SD cards Inserting/Removing an SD CardInserting Removing Approximate charging times Attaching/Removing the BatteryAttaching Charging Attaching to the hot shoe Connecting an External MicConnecting to the camera Connecting to the pantilter Connecting the AV Cord Turning on/off the power Using the Unit AloneStarting/Stopping recording Logging Controlling from a Web BrowserClick the LOG in button Status Controlling the camera Monitor tabMonitor File Management Zoom ratio Reload button Update images Setting buttonSD card Configuring the camera settings Delete Managing files stored on the SD card File Management tabUse Folder/File lists Transfer LOG in User Checking the message history Status tabCamera Network Streaming images Installing JVC CAM Control Installing the App for mobile terminals Using the Mobile TerminalNames of Apps for mobile terminals Information Setting Item ListWired Network Wireless Network Password Registered Access PointSSID, Authenticate METHOD, Password Ddns Monitoring SettingsPort Number UPnP Stream 1 / Stream Stream SettingsMAX Frame Rate MotionJPEG PAN Tilter Settings Camera Settings Media Management Common Settings Turn OFF Camera Power cannot be turned on remotely Problem Check Refer to TroubleshootingConnection URL SetupDirect Information Use Information Message Check Refer to Error messages Installed Update on this Incorrect PasswordNo Updates Available Update Corrupted WPS Power PowerLamp Status List To execute, click the Exec button Resetting to the factory settingsDeleting Resetting the connection information Click the Exec button on the right To avoid hazards Battery Pack optionalTo prevent damage and prolong service life Updating the firmware Video SpecificationsConnectors Camera MPEG-2 TS Stream output formatAC adapter UIA324-12 Pantilter GV-LS2WUP JVC Kenwood Corporation 0812HO-MW-VM