41
Information
Setting Item List
If you log in as an administrator on a browser of your computer, you can change the settings. The settings are
categorized into "NETWORK", "CAMERA/PAN TILTER", and "MANAGE".
To display the setting item list, "Configuring the Camera Settings Appropriate for Your Needs" (page 13)

"NETWORK"

Configure the settings for the network and streaming on "NETWORK". "NETWORK" is categorized into "WIRED
NETWORK", "WIRELESS NETWORK", "MONITORING SETTINGS" and "STREAM SETTINGS".

"WIRED NETWORK"

Change the settings for establishing a wired connection.
1
3
2
1 "NETWORK SETTINGS"
Select "AUTO" or "MANUAL".
If "MANUAL" is selected, enter "IP ADDRESS",
"SUBNET MASK", "DEFAULT GATEWAY",
"PRIMARY DNS", and "SECONDARY DNS"
appropriately for your environment.
2 "MAC ADDRESS"
Displays the MAC address (physical address) of
the unit. It may be required when you access from a
computer or smartphone.
3 "SAVE" button
After changing the above settings, click this button to
save the changes.

"WIRELESS NETWORK"

Change the settings for establishing a wireless
connection.
1
2
3
4
1 "DIRECT CONNECTION"
Setting for connecting directly to a computer
wirelessly (Wi-Fi).
"SSID", "PASSWORD", "PASSWORD
(CONFIRM)"
Change the SSID and password of the unit. The
SSID and password will be displayed on your
computer. Enter 2 to 25 characters for the SSID,
and 8 to 63 characters for the password.
"ENFORCED GROUP OWNER"
Set whether to become a group owner enforcedly
when connecting directly. Set it to "OFF" when
you cannot connect to a Wi-Fi direct compatible
device. (When it is set to "OFF", you cannot
connect to any Wi-Fi direct incompatible device.)
"MAC ADDRESS"
Displays the MAC address (physical address) of
the unit when connecting to a computer directly
(Wi-Fi Direct). It may be required when you
access from a computer or smartphone.
2 "ACCESS POINT CONNECTION"