17
Preparation
Selecting the Format of Images to be Output/Saved
This unit can output up to two lines of images. Set the output method and image quality appropriate for your needs.
For the "NETWORK" settings not mentioned on these pages, refer to page 41 .
1 Select "STREAM SETTINGS" in "NETWORK".
If the sub settings are not displayed, click "+" on the
left of "NETWORK".
2 Select an option from "STREAM 1/STREAM 2".
MotionJPEG(640x360)/NONE:
Select this to save recorded data inside the unit.
MotionJPEG (640x360) is used to control remotely
from a browser, etc.
MPEG-2 TS (720x576)/MotionJPEG (640x360):
Outputs low resolution data that can be used for
streaming, etc.
MPEG-2 TS (1920x1080)/MotionJPEG (640x360):
Outputs high resolution data that can be used for
streaming, etc.
3 Select an option from "MAX FRAME RATE
(MotionJPEG)".
15 fps:
Outputs images at a rate of up to 15 frames per
second. Suitable for shooting fast-moving subjects.
7.5 fps:
Outputs images at a rate of up to 7.5 frames per
second. Suitable if the communication speed or
terminal's throughput is low.
Selectable only when "STREAM 1/STREAM2" is set
to "MotionJPEG(640x360)/NONE."
4 Click the "SAVE" button.
The output image quality has been set.