Connecting Multiple Cameras

To connect multiple cameras, configure the following settings.

1Select "MONITORING SETTINGS" in "NETWORK".

If the sub settings are not displayed, click "+" on the left of "NETWORK".

Preparation

2Change "PORT NUMBER" (1 to 65535) so that the numbers do not duplicate between the cameras.

(example) camera1: 10080 camera2: 10082 camera3: 10083

3Click the "SAVE" button.

4Select "COMMON SETTINGS" in "MANAGE".

If the sub settings are not displayed, click "+" on the left of "MANAGE".

5Change "CAMERA NAME" so that the names do not duplicate between the cameras.

6Click the "SAVE" button.

Page 24

Image 24

JVC GV-LS2 U manual Connecting Multiple Cameras, Click the Save button Select Common Settings in Manage

Contents

GV-LS2 Table of Contents Connecting an External Mic Connecting the AV CordNetwork CAMERA/PAN Tilter Manage Verifying the Accessories Component Names and Functions CameraFront Back Introduction Top Bottom Pantilter FrontBottom Back Setting Use Setup Example 2 Record birds coming to a feeder on the balconyExample 3 Live-stream a performance in a studio Addition Flow of Connection/Setup Starting shooting Connecting the Camera to Your Computer Required operating environmentAttach the LAN cable to the unit Connecting the AC Adapter Configuring the initial settings IP AddressSubnet Mask List Http//condigured IP address8000 Configuring the Camera Settings Adjusting the clockSelect Common Settings in Manage Setting the user name and password Click the Update button on the rightChange Administrator USER/PASSWORD Enter USERNAME, PASSWORD, and Password Confirm Select Stream Settings in Network MPEG-2 TS 720x576/MotionJPEGMPEG-2 TS 1920x1080/MotionJPEG Select an option from MAX Frame Rate MotionJPEG Setting up the Ddns account Select Monitoring Settings in NetworkObtaining a Ddns account Adding a camera drivers user Click the ADD button Establishing a wired connection to the access point Default GatewayChanging the Connection Destination Subnet Mask Connecting to the access point wirelessly Wi-Fi Using the WPS functionSearching and connecting to the access point Select Wireless Network in Network Connecting manually Enter Password Click the Save button Connecting to a computer directly Wi-Fi Direct Connecting Multiple Cameras Click the Save button Select Common Settings in Manage Attaching the Pantilter Attaching the PantilterPush the camera straight down Screw and fix the camera Connecting the AC adapter Removing the pantilterRemove all tape from the pantilter Loosen the camera fixing screw sufficiently Establishing a wired connection Attach the conversion cable to the stopper of the LAN cableAttach the LAN cable to the unit in numerical order Connect the camera to your computer via the LAN cable Inserting/Removing an SD Card InsertingRemoving Compatible SD cards Attaching/Removing the Battery AttachingCharging Approximate charging times Connecting an External Mic Connecting to the cameraConnecting to the pantilter Attaching to the hot shoe Connecting the AV Cord Using the Unit Alone Turning on/off the powerStarting/Stopping recording Controlling from a Web Browser LoggingClick the LOG in button Controlling the camera Monitor tab MonitorFile Management Status Reload button Update images Setting button Zoom ratioSD card Configuring the camera settings Managing files stored on the SD card File Management tab Use Folder/File listsTransfer Delete Checking the message history Status tab CameraNetwork LOG in User Installing JVC CAM Control Streaming images Using the Mobile Terminal Installing the App for mobile terminalsNames of Apps for mobile terminals Setting Item List Wired NetworkWireless Network Information Registered Access Point PasswordSSID, Authenticate METHOD, Password Monitoring Settings Port NumberUPnP Ddns Stream Settings Stream 1 / StreamMAX Frame Rate MotionJPEG Camera Settings PAN Tilter Settings Common Settings Media Management Power cannot be turned on remotely Turn OFF Camera Troubleshooting Problem Check Refer toConnection Setup URLDirect Information Use Information Error messages Message Check Refer to Incorrect Password No Updates AvailableUpdate Corrupted Installed Update on this Power WPS PowerLamp Status List Resetting to the factory settings Deleting Resetting the connection informationClick the Exec button on the right To execute, click the Exec button Battery Pack optional To prevent damage and prolong service lifeUpdating the firmware To avoid hazards Specifications ConnectorsCamera Video Stream output format AC adapter UIA324-12Pantilter GV-LS2WUP MPEG-2 TS JVC Kenwood Corporation 0812HO-MW-VM

JVC GV-LS2 U Connecting Multiple Cameras, Click the Save button Select Common Settings in Manage

Models: GV-LS2 U