IBM QMS 4525 Using QMS DOC Commands, Using VMS Commands, Using UNIX Commands, qpr -d filename

Duplex Printing

Using QMS DOC Commands

Use the following QMS DOC command to select duplex printing:

%%IncludeFeature: duplex (type)

Your choices for type are on (duplex printing), off (simplex printing), and tumble (tumble duplex). (See the QMS Crown Document Option Commands manual for complete information.)

Using VMS Commands

If you are connected to the printer through a DECnet network, you can use the VMS PRINT command parameter SIDES to select duplex printing.

The PRINT command syntax for duplex printing is

$ PRINT/PARAM=(SIDES=TYPE) filename

Your choices for TYPE are ONE (simplex printing), TWO (duplex printing), and TUMBLE (tumble duplex). Replace filename with the name of your file. (See the VMS Interface for QMS Printers manual for complete information.)

Using UNIX Commands

If you are connected to the printer through a UNIX host, and you have QMS UNIX host software installed, you can use the -dor the -toption to the qpr command to select duplex printing.

The qpr command syntax for duplex printing is

qpr -dfilename

The qpr command syntax for tumble duplex printing is

qpr -tfilename

Replace filename with the name of your file. (See the QMS UNIX Host Software manual for complete information about using the qpr command.)

5-14 QMS 4525 Print System User's Guide

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500