![Preventing Inaccurate Bin Level Readings](/images/new-backgrounds/112057/112057251x1.webp)
Preventing
Inaccurate Bin
Level Readings
Preventing Inaccurate Bin Level Readings
When the sorter is available on your printer, you should do the follow- ing to prevent inaccurate bin level readings:
„Do not put paper in an empty sorter bin.
If you do, the printer thinks that the bin still contains the num- ber of sheets that it contained from the last print job. For example, if the bin contained 50 sheets from the last print job and you place a sheet in it before the next print job, the counter remains set at 50.
„Do not switch the printer off while the sorter contains output.
When it is switched back on, the
Print Image Problems
Partial images may be caused by trying to print outside of the image- able area, timing problems, or belt speed problems. Try one of the fol- lowing suggestions to correct the problem:
„Change to a larger size paper.
„Adjust the margin(s) through your application.
™
QMS 4525 Print System User's Guide |
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500