Full Selection of Interfaces
External interfaces are essential for image processing devices of the future. The PV310 is equipped with a full selection of interfaces that rival even
Ethernet Connection
•The PV310 can be connected to a LAN using
•Captured images and measurement data can be transmitted to a PC at high speed even during operation.
•The inspection status of multiple PV310 units can be monitored from a single PC.
•With the
PC
Operation Keypad
The dedicated keypad with an ergonomic structure provides excellent operability.
PLC Link Function
•The PV310 can communicate easily with external devices, such as PLCs, using the RS232C port.
•The PV310 can be connected to other companies' PLCs without requiring additional programming. Of course it can be connected to our PLCs, too.
Supported Models:
•Matsushita Electric Works PLCs
•OMRON Corporation - C, CV and CS1 series
•Mitsubishi Electric Corporation - A, Q and FX series
•Rockwell Automation DF1 protocol
•Fuji Electric SX series
VGA Monitor
Judgment results and program settings are displayed in color for outstanding visibility.
(Captured images are in black and white.)
Note: Commercially available VGA monitors may also be connected (devices supporting horizontal synchronous frequency: 31.466KHz
External Memory (CF Card) Support
•In RUN mode:
•Can save captured images. [Storage capacity:
Approx. 2,000 images (512 MB)]
•Saves inspection results.
Facilitates trend tracking and data analyses.
•In the setting mode:
•Backs up setting data and image data captured by the unit.
Note: Backup image data can be used as regular bitmap files on a PC.
DIN Rail Installation
Connection of up to Two
Identical Cameras
Up to two identical cameras can be connected. The following camera types are available.
Standard camera [ANM832 (CE)]
PV310 | Two cameras |
Connection of up to Four Cameras by a Camera Switching Unit
Up to four identical standard or
*Excluding
This connection is ideal for:
• Control of different inspections by a single controller unit
• Inspection of wide areas, and positioning of workpieces during the LCD lamination process, etc.
Camera switching unit
and vertical synchronous frequency: 59.94KHz only.)
Operation cannot be guaranteed with devices from other manufacturers.
(ANPV3700)
PV310
Cameras
•Camera Switching Mode | •Camera Image Split Mode |
Images taken by either of two cameras | (top/bottom split and left/right split) |
| |
connected to the camera switching unit | Half images taken by two cameras are |
are output to the PV310. | combined into one, which is then |
* Available for ANM832 (CE) and | output to the PV310. |
ANM831 | * Available for ANM832 (CE) only |
6
