
MANUAL CLOCK SETTING
You must set the date and time manually for Timer Recordings, ON/OFF Timer and Daylight Saving Time if the Auto Clock process did not set them correctly.
EXAMPLE: Setting the clock to “8:30 AM”, 29th (WED) October, 2003.
1To turn on the TV/VCR, press the POWER button.
2Adjust the volume level by pressing the VOL + or – button. The volume level will be indicated on the screen by
1 Press the MENU button. |
M E N U
TIMER REC SET
green bars. As the volume level increases, so do the number of
VOLUME | 32 |
| Press the SET/TRACKING + or – |
| button to select the SYSTEM |
| SETUP option, then press the |
| ENTER button. |
2 | Press the SET/TRACKING + or – |
| button to select the CLOCK SET |
| option, then press the ENTER |
| button. |
3 | Press the SET/TRACKING + or – |
| button to set the month, then press |
| the ENTER button. |
4 | Set the day, year and time as in |
| step 3. |
After setting the clock, date and time starts functioning automatically.
TV SETUP
CH SETUP
AUTO REPEAT ON
OFF
SYSTEM SETUP
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
| AUTO CLOCK | ON OFF | |
| STANDARD TIME | ||
| |||
| DAYLIGHT SAVING TIME | ||
| |||
CLOCK SET |
|
| |
| MONTH | 10 |
|
| DAY | 1 | (WED) |
| YEAR | 2003 | |
| TIME | 12 | : 00 AM |
CLOCK SET |
|
|
MONTH | 10 |
|
DAY | 29 | (WED) |
YEAR | 2003 | |
TIME | 8 | : 30 AM |
bars. If the volume decreases, the number of green bars also decreases.
3 Set the TV/CATV menu option to the appropriate | ||
position (See page 16). | ||
4 Press the Direct Channel selection buttons to select | ||
the channel. | ||
• | TV mode direct channel selection | |
| When the TV/CATV menu option is in the TV | |
| position, all channels can be instantly selected by | |
| using two buttons (for example, to select channel 2, | |
| press "0", then "2". If you press only "2", channel | |
| selection will be delayed for a few seconds). For | |
| channels 10 and above, press the 2 digits in order. | |
• | CATV mode direct channel selection | |
| When the TV/CATV menu option is in the CATV | |
| position, channels can be selected as follows: | |
• | TO SELECT CATV CHANNELS: | |
| Press "0" twice, then | |
|
| Example, to select channel 2, press "002". |
8:30 AM WED
Press "0", then the remaining 2 digits. | |
| Example, to select channel 12, press "012". |
Press the 2 digits in order. | |
| Example, to select channel 36, press "36". |
| |
| Example, to select channel 120, press "120". |
NOTES: • After a power failure or disconnection of the power plug, the time display will be lost. In this case, set the present time again if the Auto Clock did not set correctly.
NOTE FOR CHANNELS
If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.
CH 012
•To move cursor backward, press the CANCEL button.
NOTES: • If a channel with no broadcast is selected, the sound will automatically be muted.
•If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
14