LOCATION OF CONTROLS
FRONT | REAR |
20
1
| VIDEO |
UHF/ | AUDIO |
VHF | |
OUT | LINE1 |
2 |
| 3 4 | 5 | 6 |
|
| 7 | 8 | 16 | 17 | 18 | 19 |
POWER | POWER PROG TIMER | REC |
|
|
|
|
|
|
|
|
| |
| VOL | CH | REC STOP/EJECT | PLAY | REW/ | FF/ |
|
|
|
|
| |
9 | 10 | 11 | 12 |
| 13 | 14 |
|
| 15 |
|
|
|
DESCRIPTION OF CONTROLS
FRONT:
1.Cassette Loading Slot - To insert or remove a video tape.
2.POWER Button - Press to turn the TV/VCR on or off.
3.POWER Indicator - Light when the power is turned on.
4.PROG TIMER Indicator - Lights when the unit is in the Timer Record Mode.
5.REC Indicator - Lights when the TV/VCR is recording.
6.STOP/EJECT Button - Press once to stop the tape in any mode. Press again to eject the tape.
7.FF (Fast Forward) Button - In the Stop mode, this button rapidly winds the tape forward. In the Play mode, this button activates forward search.
8.PHONES Jacks - Plug monaural headphones or an earphone with an 1/8" miniplug into these jacks for private listening. Two persons can be able to use these jacks at the same time.
9.Remote Sensor - Signals from the Remote Control are received here.
10.VOL
11.CH 
/ 
Buttons - Press to select a channel for viewing or recording.
12.REC Button - Press once to start normal recording. Additional presses activate
13.PLAY Button - Press to play a prerecorded tape.
14.REW (Rewind) Button - In the Stop mode, this button rapidly winds the tape backwards. In the Play mode, this button activates reverse search.
15.Audio/Video In (LINE 2) Jacks - Audio and video signal cables from an external source can be connected here.
REAR:
16.VHF/UHF Antenna Jack - Connect the 75 ohm coaxial cable from the antenna or Cable TV service to this jack.
17.AUDIO/VIDEO OUT Jacks - Used to output audio and video signals to a TV, amplifier or VCR.
18.AUDIO/VIDEO IN (LINE 1) Jacks - Audio and video signal cables from an external source can be connected here.
19.AC Power Cord - Connect to a 120V, 60Hz outlet.
20.DC Input Jack - Connect the 12V DC car cord (supplied) here for DC operation.
8
