Tape Operation
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program index and information are also included. These index marks can be used to access or scan recordings.
Index Search
Go directly to the desired recording.
1 INDEX SEARCH ENTER INDEX NUMBER:1 US I NG
FORWARD SEARCH:FF
REVERSE SEARCH:REW
NEXT : SEARCH
EX I T : STOP
Press SEARCH*
in Playback or Stop mode to display INDEX SEARCH screen, and then press NUMBER Keys to select the recording number.
•To calculate number, see below.
|
| Press FF or REW |
|
| to start search. |
|
|
|
2 | INDEX SEARCH | Play begins at |
| search end. To | |
| searchforwardor | |
|
| back 1 index, |
| FORWARD SEARCH:FF | press FF or REW |
| REVERSE SEARCH:REW | while screen left in |
|
|
displayed (10 sec.).
To cancel, press PLAY or STOP.
REW FF
To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 | 2 | 3 | 4 |
| 5 | 6 | 7 |
|
|
|
|
|
|
|
|
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1 | 2 | 3 | 47 | 5 | 6 |
|
NOTE: 
indicates start points of each recording.
Notes
•Make each entry within 5 minutes, or the Index Search mode will be canceled.
•If Index Search is started very close to an index mark, that index mark may not be counted in the search.
34
For assistance, please call :
