Panasonic RP-WH5000 manual Selecting the surround field, Using the transmitter and headphones

Using the transmitter and headphones

Selecting the surround field

When you remove the headphones, the power turns off automatically (Auto power on/off function).

Do not pull up the free-adjusting band when not using the headphones. This may cause the auto power on/off function to switch the headphones back on and battery power to run down.

Free-adjusting band

SURROUND

MUSIC

CINEMA

VOICE

Press and hold [SURROUND] to select the desired surround mode.

Press and hold

OFF MUSIC CINEMA VOICE

•The SURROUND lamp for the selected mode will come on.

•This will go off, if [OFF] is selected.

ENGLISH

If no audio signal is received at the transmitter for more than 5 minutes (approximately)

The infra-red rays being emitted from the transmitter automatically stop and the transmitter’s POWER/CHARGE lamp goes out. These infra-red rays start being emitted again when an audio signal is received. When the input audio (analog only) continues to be very low for more than 5 minutes (approximately), the infra-red rays being emitted from the transmitter may stop. If this happens, increase the volume level on the connected equipment and decrease the volume level on the headphones.

If a noise signal is input from equipment connected by the LINE IN terminal, the output of infra-red rays may be stopped.

NOTE

•The brightness of the transmitter’s infra-red signal transmission window may not be uniform. This will not effect, for example, the range of the infra-red rays.

•Use the headphones within the range of the infra-red rays ( page 11 [Placement of transmitter and headphones]).

•The actual location of the sound may be difficult to recognize with music and audio only sources such as music CDs.

•This unit simulates an average person’s HRTF*. However individual differences in human’s HRTF means that the effect of this system will vary between individuals.

*An abbreviation for Head Related Transfer Function.

RQT8164

14

Surround mode	Surround mode and suitable input source
OFF	For normal headphone play
MUSIC	When playing music sources for enhanced acoustics.
CINEMA	When playing movie sources for greater audio impact.
	Creates a feeling close to being actually part of the scene.
	When playing sports game sources. Reproduces the
VOICE	excitement of being in a stadium at a noisy sports scene
	while making the sound of the announcer or commentator
	easier to hear.

NOTE

•Depending on the signal being input, volume may vary when changing between surround modes.

•There is no surround effect when playing a monaural source.

RQT8164

15

14 15