Panasonic RQT7230-3Y Using play mode functions, Output separation dual output separation

Using play mode functions

PLAY MODE lamp

Individually adjusting the left (L) and right (R) input

Using the play mode function, by separating the left (L) and right (R) selected input channel you can individually adjust the left (L) and right

(R) volume and sound.

1 Switch to either [L/R SPLIT (CH1 CH2)] or [L/R SPLIT (CH3 CH4)] and select the channel to adjust individually

The input of the selected channel is allocated to the channel to be adjusted on the panel.

CH1 or CH2 input: Left (L) is input to CH1 on the panel, right

(R) is input to CH2 on the panel.

CH3 or CH4 input: Left (L) is input to CH3 on the panel, right

(R) is input to CH4 on the panel.

•The L or R PLAY MODE lamp of the selected channel lights.

•By selecting OFF, input becomes both channels without any separation. The L or R PLAY MODE lamp doesn’t light.

2 Adjusting left (L) and right (R) input level and sound, and use the channel fader to adjust the volume

( page 9, Mixing, instructions 4 - 5)

Adjusting the CH1 or CH2 level, sound, channel fader

Left (L) input: Use any of the CH1 knobs on the panel

Right (R) input: Use any of the CH2 knobs on the panel

Adjusting the CH3 or CH4 level, sound, channel fader

Left (L) input: Use any of the CH3 knobs on the panel

Right (R) input: Use any of the CH4 knobs on the panel

•Mixed source audio is output from the left (L) and right (R) terminals of MASTER OUT 1.

Using the cross fader

From Mixing on page 9, perform instructions 6-7.

Select the same channel selected above in instruction 1 for switching ASSIGN A and ASSIGN B.

Adjusting the master output volume and balance

From Mixing on page 9, perform instruction 8.

Output separation (dual output separation)

By turning the SEPARATE OUT function ON, you can output audio through 2 separate channels, from MASTER OUT 1 (FRONT) and from MASTER OUT 2 (REAR). You can adjust the left and right output individually and use the cross fader for real time play.

(e.g.) MASTER OUT 1	(FRONT)		[MASTER OUT 1]
		L		R
terminal:
For the front speaker			Venue
MASTER OUT 2	(REAR)		[MASTER OUT 2]
		L		R
terminal:
For the rear speaker

Turn [SEPARATE OUT] ON

•CH1 and CH2 input is output from the MASTER OUT 1 (FRONT) and MASTER OUT 1 (XLR) terminal.

•CH3 and CH4 input is output from the MASTER OUT 2 (REAR) terminal.

•The FRONT and REAR PLAY MODE lamps light.

Using the cross fader

From Mixing on page 9, perform instructions 6-7.

While the cross fader is in NORMAL position

While ASSIGN A : 1 or 2, ASSIGN B : 3 or 4

When the cross fader is moved all the way toward :

Only the source audio assigned to is output from the MASTER OUT 1 (FRONT) and MASTER OUT 1 (XLR) left (L) and right (R) terminals.

When the cross fader is moved all the way toward :

Only the source audio assigned to is output from the MASTER OUT 2 (REAR) left (L) and right (R) terminals.

When the cross fader is in the center position:

Source audio assigned to is output through the MASTER OUT 1 (FRONT) and MASTER OUT 1 (XLR) terminals, and source audio assigned to is output through the MASTER OUT 2 (REAR) terminal.

Adjusting the input level and sound, and using the channel fader to adjust the volume

From Mixing on page 9, perform instructions 4-5.

Adjusting the master output volume and balance

From Mixing on page 9, perform instruction 8.

Adjust the volume and left (L) and the right (R) balance of the MASTER OUT 1 (FRONT), MASTER OUT 1 (XLR) and MASTER OUT 2 (REAR) output.

Adjusting individually of left (L) and right (R) input

Perform instructions 1-2on the left.

12

RQT7230