Panasonic SC-PM53, RQTV0097-2P, SCPM533 important safety instructions Advanced play

Press [CD 6] to start play.

Press [CD 6] and then [STOP 7].

Press [PROGRAM]. Press [DISC].

RQTV0097

8

Discs (continued)

Checking which discs are in the trays (CD CHECK)

CD MP3 WMA

1 Press [CD CHECK].

CD CHECK

5

4

3 2

1

2 Press the button again to close the trays.

Note

•The tray with a disc being played will not open.

•If the player is stopped, all trays will open.

•Do not remove or insert discs during disc check.

•Do not pull out the trays during disc check.

•8 cm discs cannot be checked.

Display function

This function allows you to display the information of the current track.

Press [DISPLAY] repeatedly during play or pause mode.

CD

Elapsed time Remaining time

MP3 WMA

Elapsed time	Remaining	Album name	Track name
	time

Tag (Artist) Tag (Track) Tag (Album)

Note

•Maximum number of displayable characters: approximately 30

•This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not supported will not be displayed.

•ID3 is a tag embedded in MP3 tracks to provide information about the track.

Advanced play

Direct access play

This function allows you to start play from a specific track.

CD

Press the numeric buttons to select and play your desired track.

MP3 WMA

1	Press [ALBUM or ] to select the album.
2	Press [3/FF/¢] once and then the numeric buttons
	to select and play your desired track.

For two-digit track, press [h10] once, and then the two digits.

For three-digit track, press [h10] twice, and then the three digits.

Note

This function does not work during any random/program mode.

Repeat play

You can repeat program play or other selected play mode.

CD MP3 WMA

Press [REPEAT] before or during play. “REPEAT ON” and “ ” are displayed.

To cancel

Press [REPEAT] again.

“REPEAT OFF” is displayed and “ ” is cleared.

Program play

This function allows you to program up to 24 tracks.

CD

1

2

3

4 (Within 10 seconds or so)

Press [1~5] to select your desired disc.

5 Press the numeric buttons to select your desired track.

6 Repeat steps 3 to 5 to program other tracks.

7

MP3 WMA

1	Press [CD 6] and then [STOP 7].
2	Press [DISC].
3	(Within 10 seconds or so)
	Press [1~5] to select your desired disc.
4	Press [STOP 7].
5	Press [PROGRAM].
6	Press [ALBUM	or ] to select your desired
	album.
7	Press [3/FF/¢] once and then the numeric buttons
	to select your desired track.
8	Press [ENTER].
	Repeat steps 6 to 8 to program other tracks.
9	Press [CD 6] to start play.

To	Action
cancel program mode	Press [PROGRAM] in the stop mode.
replay the program	Press [PROGRAM] then [CD 6].
check program	Press [	/REW/4] or [ /FF/¢] when
contents	“PGM” is displayed in the stop mode.
	To check while programming, press
	[PROGRAM] twice after “PGM” appears,
	then press [ /REW/4] or [ /FF/¢] .
add to the program	CD
	Repeat step 3 to 5 in the stop mode.
	MP3	WMA
	Repeat steps 6 to 8 in the stop mode.
clear the last track	Press [DEL] in the stop mode.
clear all programmed	Press [CLEAR] in the stop mode. “CLR ALL”
tracks	is displayed.

Note

•When you try to program more than 24 tracks “PGM FULL” appears.

•During program play, skipping is always in the programmed order, whether forward or backward.

•You cannot program CD-DA together with MP3 and WMA tracks.

•You cannot change or open other trays during program play mode.

•CD

During program play, you can search backward or forward only within the current track.

•MP3 WMA

The program memory is cleared when you change a disc or open a disc tray.