Panasonic SC-PM53 Timer, Setting the clock, Using the sleep timer, Using the play or record timer

Timer

Setting the clock

This is a 12-hour clock.
1	Press [CLOCK/TIMER] to select “CLOCK”.
	Each time you press the button:
		CLOCK		˚ PLAY			˚ REC
			Origina		l	display

2 Within 5 seconds, press [4/REW/4] or [3/FF/¢] to set the time.

3 Press [CLOCK/TIMER] again to confirm.

Displaying the clock

Press [CLOCK/TIMER] to display the clock for a few seconds.

Note

The clock may lose or gain minutes over a period of time. Readjust as necessary.

Using the sleep timer

This function enables you to turn off the unit automatically after the set time.

Press [SLEEP] repeatedly to select your desired time.

30MIN 60MIN 90MIN 120MIN OFF

Sleep timer indicator

To cancel

Press [SLEEP] to select “OFF”.

Changing the remaining time

Press [SLEEP] to show the remaining time, and press [SLEEP] again to select your desired time.

Note

•The play and sleep timer or the record and sleep timer can be used together.

•The sleep timer always has priority. Be sure not to overlap timer settings.

Using the play or record timer

You can set the timer to come on at a certain time to wake		ENGLISH
you up (play timer) or to record from the radio or a music port
source (record timer).
Preparation
Turn the unit on and set the clock.
Timer	Action
Play timer	Prepare the music source you want to listen
	to; cassette, disc number (1-5), radio or
	music port source, and set the volume.
Record timer	Check the cassetteʼs erasure prevention
	tabs (refer to page 9), insert the cassette and

tune to the radio station (refer to page 10) or select music port source (refer to page 13).

1 Press [CLOCK/TIMER] repeatedly		to select your
desired timer.
CLOCK	˚ PLAY	˚ REC

Original display

2 Within 5 seconds, press [4/REW/4] or [3/FF/¢] to set the starting time.

Start time

Play timer indicatorRecord timer indicator

3	Press [CLOCK/TIMER] to confirm.
4	Repeat steps 2 and 3 to set the finishing time.
		Finish time

To activate the timer
5	Press [˚PLAY/REC] to turn on your desired timer.
	˚ PLAY	˚ REC
	no display (off)
6	Press [y] to turn off the unit.
	The unit must be off for the timers to operate.

To enjoy the desired source after the timer setting is completed.

The volume level (for play timer) and music source are stored in the timer memory and the timer will start in these preset conditions. However, the disc numbers do not get stored in the timer memory.

1.After step 5, start playing the desired source.

2.Reset the disc numbers if you have changed any of them, confirm that a disc or cassette is inserted, then press [y] to put the unit on standby.

RQTV0097

11