Panasonic SA-XR30 Main, Dts Fix, Setup, Dr Comp, Dual Prg, Complete, A/D attenuator, Operations

INPUT SELECTOR

BAND

-HELP

SPEAKERS -RESET TUNE 1

	-HELP
SPEAKERS	-RESET
POWER 8

INPUT SELECTOR	VOLUME
	DOWN	UP
		PHONES

A/D attenuator	1. Enter the setup			2. Select.		3. Select.	4. Exit the setup
		mode.					mode.
Turn the A/D attenuator on if “OVERFLOW”			-HELP		-HELP			-HELP
lights frequently when using 2-channel						INPUT SELECTOR
analog input.		SPEAKERS	-RESET	SPEAKERS	-RESET		SPEAKERS	-RESET
The factory setting is OFF.
	Press and hold at the						Press and hold at the
	same time						same time

SETUP

A/D

ATT

OFF

COMPLETE

OFF

ON

Dynamic range compression

1. Enter the setup

2. Select.

3. Select.

4. Exit the setup

Change this setting to listen to software

recorded

with

Dolby Digital at

low volume

mode.

mode.

(such

as

late

at

night) maintaining audio

INPUT SELECTOR

-HELP

-HELP

-HELP

clarity. It reduces the peak level in loud

SPEAKERS

-RESET

SPEAKERS

-RESET

SPEAKERS

-RESET

scenes without affecting the sound field.

OFF:

Press and hold at the

Press and hold at the

The software is played with the original

same time

same time

dynamic range (factory setting).

STANDARD:

SETUP

DR COMP

OFF

COMPLETE

The level recommended by the producer of

the software for household viewing.

OFF, STANDARD, MAX

MAX:

The

maximum

allowable

compression

(recommended for night viewing).

Dual program

1. Enter the setup

2. Select.

3. Select.

4. Exit the setup

mode.

mode.

When the input signal is Dolby Digital and

-HELP

-HELP

-HELP

“DUAL” appears in the display, the audio to

INPUT SELECTOR

be output is set.

SPEAKERS

-RESET

SPEAKERS

-RESET

SPEAKERS

-RESET

MAIN: Main audio output

SAP: Sub channel audio output

Press and hold at the

Press and hold at the

MAIN+SAP: Main and sub channel audio

same time

same time

output

SETUP

DUAL PRG

MAIN

COMPLETE

The factory setting is MAIN.

MAIN, SAP,

MAIN+SAP

DTS FIX mode	While the input source is selected
In rare cases, the unit may have trouble	BAND	TUNE 1	DTS FIX
recognizing the digital signals on discs.
	Press and hold at
With DTS, the signals may not be recognized			• To cancel, perform the same operation again.
at all. Engage the DTS FIX mode if this	the same time for
			“AUTO” is displayed.
occurs.	2 seconds.
When DTS FIX mode is on, the unit cannot
process other signals. This may cause noise
to be output. Turn the setting off in this case.

•When you turn the unit to standby, the DTS FIX mode is canceled.

Operations

RQT7512

17