Panasonic SA-XR30 important safety instructions Specifications IHF’78

Specifications (IHF’78)

nAMPLIFIER SECTION

Rated minimum sine wave RMS power output

20 Hz-20 kHz both channels driven
0.09 % total harmonic distortion		100 W per channel (6 Ω)
1 kHz continuous power output both channels driven
0.09 % total harmonic distortion		105 W per channel (6 Ω)
Total harmonic distortion
rated power at 20 Hz-20 kHz		0.09 % (6 Ω)
Power bandwidth
both channels driven, –3 dB		4 Hz-88 kHz (6 Ω, 0.9 %)
Power output each channel driven
0.9 % total harmonic distortion at 1kHz
Front (L/R)		100 W (6 Ω)
Center		100 W (6 Ω)
Surround (L/R)		100 W (6 Ω)
Load impedance
Front (L/R)		6-8 Ω
Center		6-8 Ω
Surround (L/R)		6-8 Ω
Frequency response
CD, TV, DVD, DVR/VCR		4 Hz-88 kHz, ±3 dB
Input sensitivity
CD, TV, DVD, DVR/VCR		27 mV (200 mV, IHF ’66)
Input impedance
CD, TV, DVD, DVR/VCR		22 kΩ
S/N (IHF A)
CD, TV, DVD, DVR/VCR (Digital Input)		85 dB (103 dB, IHF ’66)
Tone controls
BASS		50 Hz, +10 to –10 dB
TREBLE		20 kHz, +10 to –10 dB
Subwoofer frequency response (–6 dB)		7 Hz–200 Hz
Digital input	(OPTICAL)	2
	(COAXIAL)	2

nFM TUNER SECTION

Frequency range	87.9-107.9 MHz
Sensitivity	11.2 dBf (2 µV, IHF ’58)
50 dB quieting sensitivity
MONO	18.3 dBf (4.5 µV, IHF ’58)
STEREO	38.3 dBf (45 µV, IHF ’58)
Total harmonic distortion
MONO	0.2 %
STEREO	0.3 %
S/N
MONO	73 dB
STEREO	67 dB

Frequency response	20 Hz-15 kHz, +1 dB, –2 dB
Alternate channel selectivity	65 dB
Capture ratio	1.5 dB
Image rejection at 98 MHz	40 dB
Spurious response rejection at 98 MHz	75 dB
AM suppression	50 dB
Stereo separation
1 kHz	40 dB
10 kHz	30 dB
Antenna terminal	75 Ω (unbalanced)

n AM TUNER SECTION

Frequency range	530-1710 kHz
Sensitivity	20 µV, 330 µV/m
Selectivity	55 dB
IF rejection at 1000 kHz	50 dB

n VIDEO SECTION

Output voltage at 1 V input (unbalanced)	1±0.1 Vp-p
Maximum input voltage	1.5 Vp-p
Input/output impedance	75 Ω

n GENERAL

Power supply	AC 120 V, 60 Hz
Power consumption	100 W
Dimensions (W x H x D)	430 x 83 x 376 mm
(16-15/16'' x 3-9/32'' x 14-13/16'')
Mass	4.0 kg (8.8 lb.)
n DIN POWER
1 kHz, T. H. D 1 %	2 x 100 W (6 Ω)
Power consumption in standby mode:	1 W

Notes:

1. Specifications are subject to change without notice. Mass and dimensions are approximate.

2.Total harmonic distortion is measured by the digital spectrum analyzer.

Reference

RQT7512

19