10
RQT8043
RQTV0061
LANG - 5 LANG - 4 FRANÇAIS DANSK ENGLISH
NOTE on CDs
This unit can access up to 99 tracks.
Choose disc with this mark.
• This unit can play MP3 or WMA fi les and CD-DA format audio
CD-R/RW that have been fi nalized.
It may not be able to play some CD-R/RW due to the condition of
the recording.
Do not use irregularly shaped disc.
Do not use disc with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers.
Do not attach extra labels or stickers on the disc.
Do not write anything on the disc.
Using DualDiscs
The “CD” sides of DualDiscs do not meet the CD-DA standard so it
may not be possible to play them on this unit.
Not doing the following will cause damage to the unit.
Removing the power plug
• Press [y/I, POWER] to turn off the unit and then remove the
power plug only after all the displays have disappeared.
Tray caution
Always press [0, OPEN/CLOSE] to insert or remove a disc.
Do not push or pull out the tray by hand as this will cause an
accident.
Inserting a disc
Place the disc correctly label-up as shown in the diagram.
Insert one disc into the tray.
NOTE on MP3 or WMA
Files are treated as tracks and folders are treated as albums.
This unit can access up to 999 tracks, 255 albums and 20
sessions.
Disc must conform to ISO9660 level 1 or 2 (except for extended
formats).
To play in a certain order, prefi x the folder and fi le names with 3-digits
numbers in the order you want to play them.
When “NOT MP3/ERROR1” appears on the display, an unsupported
MP3 format is being played. The unit will skip that track and play the
next one.
Noise may occur when playing WMA fi les.
This unit cannot play WMA fi les that are copy protected.
Limitations on MP3 or WMA play
If you have recorded MP3 or WMA on the same disc as CD-DA,
only the format recorded in the fi rst session can be played.
Some MP3 or WMA may not be played due to the condition of the
disc or recording.
Due to differences and variations of WMA tags, some fi les may not
play or display the tags’ information properly.
• Recordings will not necessarily be played in the order you recorded
them.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
Windows Media, and the Windows
logo are trademarks, or registered
trademarks of Microsoft Corporation
in the United States and/or other
countries.
WMA is a compression format
developed by Microsoft Corporation.
It achieves the same sound quality
as MP3 with a fi le size that is smaller
than that of MP3.

Cassette tape – Play and record

Numeric
buttons
The buttons described for “Cassette tape – Play and
record” are mainly for the main unit unless indicated
otherwise.

Basic playBasic play

You can use either DECK 1 or DECK 2 for tape playback.
Use normal position tapes.
High position and metal position tapes can be played, but
the unit will not be able to do full justice to the characteristics
of these tapes.
1Press [3, TAPE].
The unit turns on.
If a cassette was loaded, play starts automatically (One
touch play).

Discs (Continued)

RQTV0061-4P_1EN.indd 10RQTV0061-4P_1EN.indd 10 2/17/06 11:27:10 AM2/17/06 11:27:10 AM