Panasonic SC-AK960 1, 2 3, 3, 1, 2, 3, 4, 1, 2, 3 4, Microphone mixing, 1, 2 3, 1, 2, 4, Timer

RQT8043

RQTX0169

LANG - 5

LANG - 4

FRANÇAIS

DANSK

DANSK ENGLISH

The buttons described for “Microphone mixing” are mainly for

the main unit unless indicated otherwise.

Enjoying the microphone mixing

You can enjoy microphone mixing from various music sources (cas-

sette, disc, radio or other external equipments).

1 Firstly, lower the volume with [MIC VOL, MIN], connect the

microphone.

Plug type : Ø 3.5 mm (1/8˝) monaural

2 Start playing the music source.

Adjust the volume with [VOLUME −

] or [VOLUME +

] and

[MIC VOL, MIN] or [MIC VOL, MAX] and sing along.

Note:

• If a strange noise (howling) is emitted during use, move the

microphone away from the speakers, or turn down the microphone

volume.

• When you are not using the microphone, disconnect it from the

microphone jack, and turn down the microphone volume level to

“MIN”.

• Sound adjustments can be made using microphone mixing but

recording will not be affected.

Record microphone mixing

1 Press [0, OPEN] and insert the cassette to be recorded.

Insert with the side to be recorded facing towards you and the

exposed tape facing down.

2 Lower the volume with [MIC VOL, MIN], then connect the

microphone.

3 Select the music source:

When singing

along with

discs

Insert the desired disc (\ page 8).

When singing

along with

radio

Select your desired station (\ page 12).

When singing

along from

other external

equipments

Connect and prepare the external equipment

(\ page 15).

4 Press [¶, REC] and start microphone mixing.

To record your voice

1 Press [0, OPEN] for DECK 2 and insert the cassette to be

recorded.

2 Lower the volume with [MIC VOL, MIN], then connect the

microphone.

3 Press [¶, REC] to start recording.

4 Speak through the microphone and adjust the volume with

[VOLUME −

] or [VOLUME +

]

and [MIC VOL, MIN] or

[MIC VOL, MAX].

Microphone mixing

Setting the clock

This is a 12-hour clock.

1 Press and hold [

–

CLOCK / TIMER] to select “CLOCK”.

Each time you press and hold the button:

CLOCK ˚ PLAY

Original display

˚ REC

2 (Within 8 seconds or so )

Press [4, / REW] or [¢, / FF] to set the time.

3 Press and hold [

–

CLOCK / TIMER] to finish setting the time.

Displaying the clock

Press and hold [

–

CLOCK

TIMER] once when the unit is on or in

standby mode.

The time is displayed for a few seconds.

Note:

Reset the clock regularly to maintain accuracy.

Using the play or record timer

You can set the timer to come on at a certain time to wake you up

(play timer) or to record from the radio or the external equipment

(record timer).

Play timer and record timer cannot be used together.

Turn the unit on and set the clock.

Timer Action

Play timer Prepare the music source you want to listen to;

cassette, disc number (1 ~ 5), radio or other external

equipments, and set the volume.

Record

timer Check the cassette’s erasure prevention tabs

(\ page 11), insert the cassette and tune to the

radio station (\ page 12) or select the external

equipment (\ page 15).

1 Press and hold [– CLOCK/TIMER] to select the timer function.

Every time you press and hold the button:

CLOCK ˚ PLAY

Original display

˚ REC

˚PLAY : to set the play timer

˚REC : to set the record timer

(Proceed to the next step within 8 seconds )

2 Press [4, / REW ] or [¢, / FF] to set the starting time.

Play timer indicator

Start time

Record timer indicator

3 Press and hold [

–

CLOCK / TIMER] to confirm.

4 Repeat steps 2 to 3 to set the ﬁ nishing time.

Finish time

Timer

(Continued on next page)

RQTX0169-P.indd 13RQTX0169-P.indd 13 7/18/08 9:25:00 AM7/18/08 9:25:00 AM