Panasonic SC-AK960 1, 2, 1, 2, 1, 2

RQT8043

RQTX0169

LANG - 5

LANG - 4

FRANÇAIS

DANSK

ENGLISH

External unit (continued)

Recording from a USB mass

storage class device

Press

[4, / REW ]

[¢, / FF]

to select the desired track

for recording.

2 Press [¶, REC] on the main unit to start recording.

Compatible devices

Devices which are deﬁ ned as USB mass storage class:

• USB devices that support bulk only transfer.

• USB devices that support USB 2.0 full speed.

Supported format

Files must have the extension “.mp3” or “.MP3”.

Note:

• CBI (Control/Bulk/Interrupt) is not supported.

• A device using NTFS ﬁ le system is not supported [Only FAT

12/16/32 (File Allocation Table 12/16/32) ﬁ le system is supported].

• Depending on the sector size, some ﬁ les may not work.

• This unit can access up to 255 albums (including blank folders) and

2500 tracks.

• The maximum number of tracks in a folder are 999 tracks.

• Only one memory card will be selected when connecting a multiport

USB card reader. Typically the ﬁ rst memory card inserted.

• Disconnect the USB card reader from the unit when you remove the

memory card. Failure to do so may cause malfunction to the device.

• Compatible audio device will be charged when in USB mode.

Avoid interfering with other Panasonic

equipment

Other Panasonic audio or video equipment may start functioning

when you operate the unit using the supplied remote control.

You can operate this unit in another mode by setting the remote

control operating mode to “REMOTE 2”.

The main unit and remote control must be set to the same mode.

1 Press and hold [EXT-IN] on the main unit. Then press [2]

on the remote control until “REMOTE 2” is displayed.

2 Press and hold [ENTER] on the remote control followed by

numeric button [2].

To change the mode back to “REMOTE 1”, repeat the steps above by

replacing [2] with [1].

Connecting and playing a USB mass storage

class device

The USB connectivity enables you to connect and play MP3 tracks

from USB mass storage class. Typically, USB memory devices. (Bulk

only transfer)

Preparation

Before connecting any USB mass storage device to the unit, ensure

that the data stored therein has been backed up.

USB enabled device

(not included)

It is not recommended

to use a USB extension

cable. The device

connected via the cable

will not be recognised by

this unit.

1 Reduce the volume and connect the USB mass storage

device.

2 Press [6, USB] to start play.

To Action

pause play Press [6, USB].

Press again to resume play.

stop play Press [7, CLEAR].

“RESUME” is displayed. The position is memorized.

Press [6, USB] to resume.

Press [7, CLEAR] again to clear the position.

skip tracks Press [4, / REW] or [¢, / FF].

skip album Press [ALBUM ( or )] in the play mode.

Press [ALBUM ( or )] once and then

the numeric buttons in the stop mode.

For other operating functions, they are similar as those described in

“Discs” (\ page 8 ~ 10).

RQTX0169-P.indd 16RQTX0169-P.indd 16 7/18/08 9:25:08 AM7/18/08 9:25:08 AM