Panasonic SC-AK960 5, 6, 1, 2, Sound adjustment

RQT8043

RQTX0169

LANG - 5

LANG - 4

FRANÇAIS

DANSK

ENGLISH

Timer (continued)

To activate the timer

Press and hold [– ˚PLAY/REC] to turn on your desired timer.

˚ PLAY

no display (off)

˚ REC

6 Press [y] to turn off the unit.

The unit must be off for the timers to operate.

Other basic operations

To Action

change the

settings Repeat steps 1 to 4 and 6 (\ see page 13 and

above).

change the

source or

volume

1) Press and hold [– ˚PLAY/REC] to clear the

timer indicator from the display.

2) Make changes to the source or volume.

3) Perform steps 5 to 6 (\ see above).

check the set-

tings Press and hold [– CLOCK/TIMER] repeatedly to

select ˚PLAY or ˚REC.

cancel Press and hold [– ˚PLAY/REC] to clear the timer

indicators from the display.

If you use the unit after the timers are set

After using, check that the correct tape/disc are loaded before turning

the unit off.

Note:

• The play timer will start at the preset time with volume increasing

gradually to preset level.

• The record timer will start 30 seconds before the set time with the

volume muted.

• The timer comes on at the set time everyday if the timer is on.

• The unit must be in the standby mode for the timer to function.

• If you turn the unit off and on again while a timer is functioning, the

ﬁ nish time setting will not be activated.

• If MUSIC PORT is selected as the source when the timer comes

on, the system turns on and engages MUSIC PORT as the source.

If you wish to playback or record from the portable audio equip-

ment, just activate the equipment’s play mode and increase the

volume. (See the portable audio equipment’s instruction manual.)

Using the sleep timer

This function enables you to turn off the unit automatically after the

set time.

Press [SLEEP] to select your desired time.

SLEEP 30 SLEEP 60 SLEEP 90

SLEEP OFF SLEEP 120

Sleep timer indicator

To cancel

Press [SLEEP] to select “SLEEP OFF”.

Changing the remaining time

Press [SLEEP] to show the remaining time and press [SLEEP] again

to select your desired time.

Note:

• The play and sleep timer or the record and sleep timer can be used

together.

• The sleep timer always has priority. Be sure not to overlap timer set-

tings.

• The sleep timer turns off when you perform the record function.

Selecting sound effects

Preset EQ

Press [PRESET EQ] repeatedly to select your desired setting.

HEAVY SOFT CLEAR VOCAL FLAT (off)

Setting Effect

HEAVY Adds punch to rock

SOFT For background music

CLEAR Clariﬁ es higher frequencies

VOCAL Adds gloss to vocal

FLAT No effect

Manual EQ

1 Press [MANUAL EQ] repeatedly to select your desired

setting.

BASS MID TREBLE

Setting Effect

BASS For lower pitch sound

MID For middle pitch sound

TREBLE For higher pitch sound

2 Press [4, / REW ] or [¢, / FF] to adjust the level.

Press [+] or [–] on the main unit to adjust the level.

Note:

• The level of the pitch is between -3 to +3.

• The changes you make are stored and automatically recalled the

next time you select “MANUAL EQ”.

Enhancing the bass sound

You can enhance low-frequency sound so that heavy bass sound can

be heard clearly, even if the acoustics of your room are not optimal.

To activate

Press [HARD BASS].

To cancel

Press [HARD BASS] again.

Note:

The actual effect depends on the disc.

Sound adjustment

RQTX0169-P.indd 14RQTX0169-P.indd 14 7/18/08 9:25:01 AM7/18/08 9:25:01 AM