Panasonic SC-BT100 warranty Audio tab, Display tab, TV/Device Connection tab

“Audio” tab

Dynamic Range Compression	≥On
[BD-V] [AVCHD] [DVD-V](Dolby Digital, Dolby Digital Plus and Dolby	≥Off
TrueHD only)
Change the dynamic range (> 43) for late night viewing.
Speaker	Make settings for your speakers. (> 34)
BD-Video Secondary Audio [BD-V]	≥On: The primary audio and secondary audio are mixed and output.
Turn on/off the clicking sound on the menu and audio with	The sampling frequency is converted to 48 kHz.
secondary video in picture-in-picture mode.	≥Off: The clicking sound on the menu and secondary audio are not
≥When this is set to “On”, Dolby TrueHD, Dolby Digital Plus,	output.
DTS-HD Master Audio and DTS-HD High Resolution Audio are
output as Dolby Digital.

“Display” tab

Status Messages	≥Automatic	≥Off
Choose whether to show status messages automatically.
On-screen Language	≥English	≥Français ≥Español
Choose the language for these menus and on-screen messages.
Screen Saver Function	≥On:
This is to prevent burn-in on the screen.	If there is no operation for 10 minutes or more, the displayed screen
	switches to the other states automatically.
≥When this is set to “On”, the masked-off area on the screen
becomes gray.	– When the Direct Navigator or FUNCTIONS menu is displayed, the
[Only when connecting with an HDMI cable or a component video	display returns to the screen saver mode.
cable and “HDMI Resolution” (> below) is set to any other mode	– When CD or MP3 is played, the display returns to the screen saver
than “480p”, or “Component Video Resolution” (> below) is set to	mode. (Playback continues.)
“720p” or “1080i”.]	– When still pictures are shown (except for slideshows), the display
	returns to the Direct Navigator screen.
	– During FM/AM radio broadcast reception, the display returns to the
	screen saver mode. (Reception continues.)
	≥Off
FL Display	≥Bright
Changes the brightness of the unit’s display.	≥Dim: The display is dimmed.
≥The brightness of the volume indicator (> 11) is also changed.	≥Auto: The display is dimmed, but brightens when you perform some
	operations.
License	Information about the software used by this unit is displayed.

“TV/Device Connection” tab

TV Aspect	When connected to a 4:3 aspect TV:
Set to match the type of TV connected.	≥4:3 Pan & Scan:Video recorded for a widescreen is played as Pan & Scan
	(unless prohibited by the producer of the disc). When playing
	BD-Video, video is output as “4:3 Letterbox”.
	≥4:3 Letterbox: Video recorded for a widescreen is played in the letterbox style.

		When connected to a 16:9 widescreen TV:
		≥16:9:		Video recorded for 4:3 aspect screen is displayed as a 4:3 ratio
				image in the center of the screen.
		≥16:9 Full:		Video recorded for 4:3 aspect screen is displayed as a
				horizontally stretched 16:9 image.
Time Delay		≥Auto	≥0ms	≥20ms ≥40ms ≥60ms ≥80ms ≥100ms ≥120ms ≥140ms
When connected with a Plasma display, adjust if you notice		When using VIERA Link “HDAVI Control” with “HDAVI Control 3” compatible TV
the audio is out of sync with the video.		(> 28), select “Auto”. Audio and video will automatically be set in sync. (This works
		only when “BD/DVD”, “SD”, “AUX” or “D-IN” is selected as the source.)
HDMI Connection
≥Press [OK] to show the following settings.
	HDMI Video Mode	≥On:	Images are output from the HDMI terminal in the resolution set in “HDMI
	Select “On” when video is output from HDMI AV OUT		Resolution”. Video from COMPONENT VIDEO OUT terminal is output as “480i”.
	terminal.	≥Off	Images are output in the resolution set in “Component Video Resolution”.
	HDMI Resolution	≥Auto:	Automatically selects the output resolution best suited to the
	The items supported by the connected devices are		connected TV (1080p, 1080i, 720p or 480p).
	indicated on the screen as “¢”. When any item without	≥480p	≥720p
	“¢” is selected, the images may be distorted.	≥1080i	≥1080p
	BD-Video 24p Output	≥On:	Images in 24p are output in 24p as they are.
	When playing BD-Video recorded in 24 frames, this unit		(This is effective only when “HDMI Resolution” is set to “Auto” or “1080p”
	displays each frame at 1/24 second intervalssthe same		and “TV Aspect” is set to “16:9” or “16:9 Full”.)
	interval originally shot with the film movie.		However,
	≥This item can be set only when the unit is connected to		– when video is being output at 24 frames, images from any other terminal
	a TV with an HDMI terminal that supports 1080/24p		than the HDMI terminal may not be output properly.
	input.	≥Off	– when images other than 24p are played, images are output at 60p.
	HDMI RGB Output Range	≥Standard:
	Effective when connected to a device that only supports	≥Enhanced: When the black and white images are not distinct.
	RGB output.
	HDMI Audio Output	≥On:	To output audio through TV speakers (output as 2ch PCM, regardless of
	This setting selects whether or not to output audio from HDMI.	≥Off:	source audio format channel number).
	≥When this is set to “On”, Dolby TrueHD, Dolby Digital		To output audio through system speakers. (The audio is output using the
	Plus, DTS-HD Master Audio, DTS-HD High Resolution		settings of the main unit.)
	Audio are output as Dolby Digital from system speakers.
	VIERA Link	≥On	Select when you want to use “HDAVI Control”.
	Set to use “HDAVI Control” function when connected with	≥Off:	Select when you do not want to use “HDAVI Control”.
	an HDMI cable to a device that supports “HDAVI Control”.
Component Video Resolution		≥480i	≥480p ≥720p ≥1080i
This sets the video output resolution when using		Even if you select “720p” or “1080i”, images are output in 480p when you play
COMPONENT VIDEO OUT terminals.		DVD-Video.

Advanced operations

RQT9129

33