Easy Setting Guide
Blu-ray DiscTM Home Theater Sound System
The order of setting
1 Prepare the speakers
See below1 Prepare the speakers
STEP 1
Place the | Connect the |
2 speakers | 3 cables |
See below | See over |
| Model No. | |
Turn on the | Easy setup | |
4 main unit | ||
See Easy setup screen | ||
See over |
| |
2 Place the speakers | ||
WHITE | RED |
Label each speaker cable by attaching the numbered sticker at the position indicated in the illustration. Be sure to match the number on each sticker with the circled number in the illustration.
e.g., Front speaker Lch
Refer to the rear label of the speaker before connecting the corresponding cable.
Verify the type of speaker with the label on the rear of the speaker.
Speakers | |
Front speakers | FRONT/AVANT |
Centre speaker | CENTER/CENTRE |
Surround speakers | SURROUND/AMBIOPHONIE |
e.g.,
L | R |
GREEN | PURPLE |
C | SW |
FRONT
Lch
1→
WHITEspeaker
STEP 2
Connect the speaker cables.
Insert the wire fully, taking care not to insert beyond the wire insulation.
: White
: Blue line
White
PUSH! Blue line
Subwoofer | Centre speaker | Front speakers | Surround speakers | ||
|
| Rch | Lch | Rch | Lch |
PURPLE | GREEN | RED | WHITE | GREY | BLUE |
| | | | |
BLUE | GREY |
LS | RS |
Recommended |
|
Front speakers | Surround speakers |
(L, R) | (LS, RS) |
60 |
|
| 120 |
F0211SB0