Connect the cables | It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV. | ||||||
For detailed information, refer to the operating instructions. |
| ||||||
3 Connect the cables by colour or by the numbers indicated in the illustration |
|
| |||||
to the appropriate terminals on the rear panel of the unit. |
| Adhesive tape | |||||
|
|
|
|
|
|
| |
PURPLE | GREEN | RED | WHITE | GREY | BLUE | FM indoor antenna |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| (supplied) |
|
| | | | | |
|
|
Other connection
Broadband Network Connections
By connecting this unit to the network, you can optimise the internet features of this unit.
• Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
• When using the wireless LAN function*2, the LAN cable that connected to the main unit is not necessary.
*2 South East Asia (For Malaysia, Thailand, Singapore and Hong Kong) only
e.g., For South East Asia
6 | 5 | 2 | 1 | 4 | 3 |
|
|
3Ω | 3Ω | R 3Ω L | R 3Ω L | FM ANT | AUX | ||
SUBWOOFER CENTER FRONT SURROUND | 75Ω |
|
HDMI cable (not supplied)
(Recommended for highest quality picture)
HDMI (ARC)
HDMI | If the HDMI terminal is labeled “HDMI (ARC)”, you can enjoy TV sound and |
| pictures with a single HDMI cable. |
|
If the HDMI terminal is not labeled “HDMI (ARC)”, an “Audio cable”
or “Optical digital audio cable” is required to listen to sound from the TV.
For best quality audio, use the HDMI cable (with an ARC compatible TV) or an optical digital audio cable.
LAN
Main unit
LAN cable (not supplied)
TV
OPTICAL
OUT
VIDEO IN
L
AUDIO OUT
R
Optical digital audio cable (not supplied)
Video cable*1 (supplied)
Audio cable (not supplied)
*1 Make sure that the video cable connection is made to view photos/videos from the iPod/iPhone.
If your TV does not support the above, use the audio cable.
Broadband router, etc.
Internet
4 Turn on the main unit
Connect the AC mains lead | |
1 Connect the AC mains lead to the main unit before connecting | |
to the household mains socket. | |
Before connecting the AC | Main unit |
mains lead; |
|
Set the voltage at the bottom of the main unit.
2 Turn on the TV
Turn on your TV and select the appropriate video input mode (e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.
3 Turn on the main unit
Press [ ] to turn on the main unit.
4 The Easy setup starts
The on screen display will guide you through the steps.
Easy setup
Would you like to start easy setup?
110 | 127V |
|
|
| 220 | 240V |
|
|
VOLT ADJ
Use a
AC Voltage selector
AC mains lead (supplied)
To a household mains socket
Installing batteries in the | |
| |
remote control | |
| |
R6/LR6, AA |
|
Yes No
OK
RETURN
Press [, ] to select [Yes] and press [OK].