FRONTch L
2
Push the lever in the direction indicated by the arrow, insert the wire, then release the lever.
Copper: r
Silver: s
FRONT L
To prevent damage to circuitry, never short-circuit positive (r) and negative (s) speaker wires.
AV control receiver
Rch HF FRONT
FRONT R
Push the lever in the direction indicated by the arrow, insert the wire, release the lever and press down on it lightly.
FRONT LF Rch
Match the labels on the speaker stickers with the labels on the terminals.
Connect center, surround L and subwoofer in the same way.
FRONT Rch
1
Attach the speaker-cable stickers to make connection easier.
A noise filter comes attached with the speaker cables to prevent undue influence to other equipment. Do not remove the noise filter from the speaker cable.
Connect the noise filter side of the speaker cables to the AV control receiver speaker terminals.
FRONT LF Rch
FRONT HF Rch
e.g.) FRONT R
FRONT L, R (4 m)
Attach the stickers to the speaker cables.
1
FRONT R ch
1
Speakers
STEP2
2 | Speaker cables (4 wires, 4 m) | Sheet of |
2 | Speaker cables (2 wires, 4 m) | stickers |
2 | Speaker cables (2 wires, 10 m) |
|
Copper
Twist the same colored wires together.
2Connecting the speakers
HF
LF
HF
Lch
FRONT
FRONTLch
LF
HF
LF
HF: High Frequency
LF: Low Frequency
Silver
SURROUND L,R (10 m) e.g.) SURROUND R
150 mm | 150 mm |
SURROUND | SURROUND |
R ch | R ch |
| 3 |
CENTER, SUBWOOFER (4 m) | |
e.g.) SUBWOOFER |
|
150 mm | 150 mm |
SUB | SUB |
WOOFER | WOOFER |
| 6 |
SURROUND R | |
| SURROUND R ch | SURROUND L | SUBWOOFER |
|
| CENTER | |
Copper: r |
|
| |
SURROUND R ch |
|
| |
Silver: s | 3 |
|
SPEAKERS
+
1 R (6≠) L 2 3 R (6≠) L 4 5(6≠) 6(3≠) -
FRONT HF/LF | SURROUND | CENTER SUBWOOFER |
The subwoofer’s terminals are on the bottom.
Fit the cables into the slots provided. From the side
Speaker cable 
From the rear
HF
Copper
LF | Silver |
|
Copper
Silver
Simple setup
7
RQT6924
