Panasonic SC-DT310 manual Other speaker setup options, Attatching to a wall, Remove the stand

Other speaker setup options

Attatching to a wall

(Center and surround speakers only)

Simple setup

[Note]

The wall or pillar on which the speakers are to be attached should be capable of supporting 5 kg per screw.

1 Remove the stand.

BEFORE REMOVING THE STAND

≥Take the speaker cable out of the stand’s hole if it is threaded through.

≥Lay the speaker on a soft cloth.

Unscrew the screw with a Phillips-head screwdriver.

Fitting speaker stands (optional)

2 Screw a screw (not included) into the wall.

30—35 mm

‰7.5—9.4 mm

8—11 mm

Wall

3 Fit the speaker securely onto the screw with the hole.

Preparation

Remove the stand (➡ step 1 above).

Ensure the stands meet these conditions before purchasing them. ≥Observe the diameter and length of the screws and the distance

between screws as shown in the diagram. ≥The stands must be able to support over 5 kg.

≥The stands must be stable even if the speakers are in a high posi- tion.

5 mm

pitch 0.8 mm

	60 mm
	Speaker stand
	(not included)
Attach the stands with	Plate thickness plus
these holes.
	7 to 10 mm

Keeping the cables out of the way

Pass the cables through the holes in the stand to keep them out of the way.

Pass the cable through the hole.

Pass through the cutout in the base.

Insert and tighten screw.

C

CENTER

10

Notes on speaker use

≥You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods.

≥Reduce the volume in the following cases to avoid damage.

–When playing distorted sound.

–When the speakers are receiving howling from a record player, noise from FM broadcasts, or continuous signals from an oscil- lator, test disc, or electronic instrument.

–When adjusting the sound quality.

–When turning the unit on or off.

If irregular coloring occurs on your television

These speakers are designed to be used close to a television, but the picture may be affected with some televisions and setup combinations.

Stand

If this occurs, turn the television off for about 30 minutes.

The television’s demagnetizing function should correct the problem. If it persists, move the speakers further away from the tele- vision.

Caution

≥Use the speakers only with the recommended system.

Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has oc- curred or if you experience a sudden change in per- formance.

≥Do not attempt to attach these speakers to walls using methods other than those described in this manual.

RQT6924