ENGLISH
Memory reset (Initialization)
When the following situations occur, reset the memory:
•There is no response when buttons are pressed.
•You want to clear and reset the memory contents.
To reset memory
Disconnect the AC power supply cord. (Wait for at least 3 minutes before proceeding to step 2.)
While pressing and holding down [8, POWER] on the main unit,
reconnect the AC power supply cord.
Release [8, POWER].
All the settings are returned to the factory preset. You will need to reset the memory items.
Maintenance
gPull out the power plug from the outlet for maintenance beforehand and then wipe it using a soft and dried cloth.
•When dirt is heavy, wring the cloth moistened in water tightly to wipe the dirt, and then wipe it with a dried cloth.
•Do not use solvents such as benzine, thinner, alcohol and detergent, which may deform the coating of the outer case.
•When using a chemical cloth, follow the precautions.
gCare on the CD lens
•Clean the lens regularly to prevent malfunctions. Use a blower to remove dust and a cotton swab if it is extremely dirty.
•Do not use the lens cleaner of the CD type.
Specifications
g AMPLIFIER SECTION RMS Output Power
Front Ch (both ch driven) 20 W per channel (6 Ω), 1 kHz, 10 % THD
Total RMS power40 W
FTC Output Power Stereo mode Front Ch (both ch driven)
15 W per channel (6 Ω), 20 Hz to 20 kHz, 10 % THD
Total FTC Stereo mode power |
| 30 W |
Phone jack |
|
|
Terminal |
| Stereo, 3.5 mm (1/8") jack |
Output level (CD, 1 kHz, | max. 0.2 mW + 0.2 mW, 32 Ω | |
Aux (Rear) |
|
|
Terminal |
| Stereo, 3.5 mm (1/8") jack |
g TUNER SECTION |
|
|
Preset Memory |
| FM 30 stations |
|
| AM 15 stations |
Frequency Modulation (FM) |
|
|
Frequency range | 87.9 MHz to 107.9 MHz (200 kHz step) | |
| 87.5 MHz to 108.0 MHz (100 kHz step) | |
Antenna terminals |
| 75 Ω (unbalanced) |
Amplitude Modulation (AM) |
|
|
Frequency range |
| 520 kHz to 1710 kHz (10 kHz step) |
g DISC SECTION
Disc played [8 cm (3") or 12 cm (5")]
(1)
(2)
(3)MP3*
*
RQTX1066
14
Pick up |
|
|
|
Wavelength |
|
| 795 nm |
Laser power |
|
| CLASS 1 |
Audio Output (Disc) |
|
|
|
Number of channels |
|
| FL, FR, 2 channel |
g SPEAKER SECTION |
|
|
|
Type | 1 way, 1 speaker system (Passive Radiator) | ||
Speaker unit(s) |
|
|
|
Full range |
| 6.5 cm (2 1/2") Cone type x 1 / channel | |
Passive Radiator |
|
| 8 cm (3") x 2 / channel |
Impedance |
|
| 6 Ω |
g GENERAL |
|
|
|
Power supply |
|
| AC 120 V, 60 Hz |
Power consumption |
|
| 29 W |
Dimensions (W x H x D) |
|
| 500 mm x 201 mm x 102 mm |
|
|
| (19 11/16" x 7 29/32" x 4 1/32") |
|
|
| (D = 69 mm (2 3/4") minimum) |
Mass (Weight) |
|
| Approx. 2.8 kg (6.2 lb.) |
Operating temperature range |
| 0 °C to +40 °C | |
|
|
| (+32 °F to +104 °F) |
Operating humidity range |
| 35 % to 80 % RH (no condensation) | |
|
| ||
Power consumption in standby mode: | 0.05 W (approx.) | ||
|
|
|
|
•Specifications are subject to change without notice.
•Total harmonic distortion is measured by the digital spectrum analyzer.
14
14
