Disc operations, Basic play, Program play, English, Click

Disc operations

Press [^] to turn the unit on.

Press [;, CD] to open the sliding door.

With the label of the disc facing towards you, tilt the disc into the disc tray under the sliding door.

Press [^] to turn the unit on.

Insert the disc to be played (➡ left).  Press [CD q/h] to start play.

Stop	Press [g].

Pause	Press [CD q/h]. Press again to resume play.

Skip track	Press [u/t] or [y/i].

Search the current	Press and hold [u/t] or [y/i].
track (CD)

Skip album (MP3)	Press [e,r].

Direct access play	CD: Press the numeric buttons to select the
(Play starts with the	track.
track you select.)	MP3:  Press [e,r] to select the album.
	MP3:  Press [e,r] to select the album.
	 Press [y/i] once and then the
	numeric buttons to select the track.

ENGLISH

Place the disc onto the spindle in the center and then push the disc down until it clicks into place.

Press [;, CD] to close the sliding door.

Keep fingers away from the sliding door when it is closing to avoid possible minor injuries.

Press [;, CD] to open the sliding door.

Hold the center and the top right of the disc and pull the top right of the disc to unlock it from the spindle.

Tilt the disc so as not to touch the sliding door and remove the disc.

•Damage may occur if the sliding door is forced closed.

•Be careful of CD hitting the sliding door while being removed.

Enables you to program up to 24 tracks.

Press [CD q/h] and then [g].  Press [PROGRAM].

CD:  Press the numeric buttons to select the track.

To program more tracks, continue by pressing the numeric buttons.

Press [OK] or [CD q/h] to start play.

MP3:  Press [e,r] to select the album.

Press [y/i] once and then the numeric buttons to select

the track.

Press [OK].

To program more tracks, repeat step  to .

Press [CD q/h] to start play.

Cancel program	Press [PROGRAM] in the stop mode to clear
mode	“PGM” indicator from the display.

Replay the program	Press [PROGRAM] in the stop mode and then
	[CD q/h].

Check program	Press [u/t] or [y/i] when “PGM” is
contents	displayed in the stop mode. To check while
	programming, press [PROGRAM] twice after
	“PGM” appears and then press [u/t] or
	[y/i].

Delete last	Press [DEL] in the stop mode.
programmed track

Clear all	Press [g] in the stop mode.
programmed tracks	“CLR ALL” is displayed. Within 5 seconds,
	press the button again to clear all tracks.

• The program memory is cleared when you open the sliding door.

Press [DISPLAY, –DIMMER] repeatedly during play or pause to view the current track’s information.

•Maximum number of displayable characters: approximately 30

•This unit supports ver. 1.0 and 1.1 ID3 tags. Text data that is not supported will not be displayed.

RQTX1066