Timer
Setting the clock
This is a
1Press [CLOCK/TIMER] to select “CLOCK”.
2Within 10 seconds, press [3, 4] to set the time.
3Press [OK].
≥To display the clock, press [CLOCK/TIMER].
≥Reset the clock regularly to maintain accuracy.
Play timer
You can set the timer to come on at a certain time to wake you up. This unit offers 3 optional play timers.
Preparation
≥Turn the unit on and set the clock (> above).
≥Prepare the music source (disc, radio, iPod/iPhone or AUX) and set the volume.
1Press [CLOCK/TIMER] repeatedly to select “FPLAY 1”, “FPLAY 2” or “FPLAY 3”.
2Within 10 seconds, press [3, 4] to set the starting time.
3Press [OK].
4Set the finishing time by repeating steps 2 and 3.
∫To activate the timer
5Press [PLAY, F] repeatedly to set the desired play timer on.
6Press [Í] to turn the unit off.
Check the settings | Press [CLOCK/TIMER] twice. |
(When the unit is | (The setting is displayed.) |
on or in standby |
|
mode) |
|
Cancel | Press [PLAY, F] twice to clear the timer |
| indicator from the display. |
|
|
≥The timer will start at the preset time, with the volume increasing gradually to the preset level.
Listening to audio from iPod or iPhone
Inserting/Removing an iPod/ iPhone
∫Inserting an iPod/iPhone
1Open the sliding door. (> 9)
2Insert the suitable dock adapter (not supplied) for the iPod/iPhone.
≥Insert the side of the iPod/iPhone dock adapter with the clips facing towards you first and then push the opposite side until it clicks into place.
A Clips | | | |
B Dock adapter | |||
|
| ||
C iPod/iPhone docking |
| Click! | |
switch lever |
| ||
|
| ||
D Connector |
|
|
3Press [<] to unlock the
iPod/iPhone dock and then pull the docking switch lever to tilt the iPod/iPhone dock.
4Connect the iPod/iPhone (not supplied) firmly.
≥ Be sure to remove the iPod/iPhone from its case.
5Push the docking switch
lever back until it clicks into |
| Click! | |
place. |
|
|
|
|
|
|
6 Close the sliding door. (> 9) ∫ Removing an iPod/iPhone
1Repeat step 1 and 3 (> above).
2To remove, simply pull the iPod/iPhone straight out.
3 Repeat step 5 and 6 (> above).
≥If the iPod/iPhone dock is not tilted when connecting or disconnecting the iPod/iPhone, it may cause damage to the connector.
≥Be sure to use a dock adapter that is compatible with your iPod/iPhone. To purchase a dock adapter, consult your iPod/iPhone dealer.
≥Reduce the volume of the main unit to minimum before connecting or disconnecting the iPod/iPhone.
| Sleep timer |
|
| iPod operations |
The sleep timer can turn the unit off after a set time.
Press [SLEEP] to turn the sleep function on or off.
30MIN # 60MIN # 90MIN # 120MIN
OFF (Cancel) | } |
Press [SLEEP] once to check the remaining time.
≥The play timer and sleep timer can be used together. The sleep timer always has the priority. Be sure not to overlap the timer settings.
≥When “AUTO OFF” is “ON” and the unit is left unused for about 30 minutes, the unit will shut down even if the play time or sleep time has not expired.
RQTX1260
Preparation
Press [iPod] ([HC55]: [ , iPod]) repeatedly to select “IPOD”.
Play | Press [1/;]. |
Pause | Press [1/;] or [∫]. Press again to |
| resume play. |
Skip track | Press [:] or [9]. |
Search the current track | Press and hold [6] or [5]. |
Display iPod/iPhone | Press [iPod MENU] in the play |
menu/return to previous | mode. (Remote control only) |
menu |
|
Select contents from | Press [3, 4] and then [OK]. |
iPod/iPhone menu | (Remote control only) |
|
|
≥The operations may vary or not work depending on the iPod/iPhone models.
12