Connections
∫Notes on speakers
≥These speakers do not have magnetic shielding. Do not place them near a television, personal computer or other devices easily influenced by magnetism.
Back View | |
Exhaust holes | | |
Basic Connections
1Connect the FM indoor antenna.
≥Tape the antenna to a wall or column, in a position with the least amount of interference.
Adhesive tape
FM indoor antenna
2Connect the AM loop antenna.
≥ Keep the loop antenna cord away from other wires and
cords.
AStand the antenna up on its base until it clicks. BAM loop antenna
Additional Connections
Open the
Push the projecting part to open the cover A.
Top View
| ENGLISH | ||
Headphone cover | Projecting part | ||
|
∫Connect the headphones (not supplied)
Reduce the volume level and connect the headphones.
Plug type: ‰3.5 mm (1/8q) stereo B
≥To prevent hearing damage, avoid listening for prolonged periods of time. Excessive sound pressure from earphones and headphones cause hearing loss.
∫Connect an external music device (for AUX mode)
1 | Plug the audio cable (not supplied) into | |
| the | |
|
| |
| Plug type: ‰3.5 mm (1/8q) stereo | AUX |
2 | Press |
|
select “AUX” and start playback on the connected device.
You can select the sound input level of the external device.
[HC55] 1 Press [SOUND] repeatedly to select “INPUT LEVEL”.
2Press [2, 1] to select “HIGH” or “NORMAL”.
[HC35] Press [INPUT LEVEL] repeatedly to select “HIGH” or “NORMAL”.
≥Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal will distort the sound.
≥For details, refer to the instruction manual of the other equipment.
≥Cables and devices are not supplied.
3Connect the AC power supply cord.
Connect the AC power supply cord after all other connections are complete.
Turn the unit on after a few seconds.
Power consumption in standby mode:
Approx. 0.1 W
To household AC outlet
RQTX1260
5