Opening/Closing the sliding door

Preparation

Press [Í] to turn the unit on.

Opening the sliding door

For disc operations:

AWhile the sliding door is closed, press [CD <]

to open the sliding door.

For iPod/iPhone operations:

BWhile the sliding door is closed, press [iPod <] to open the sliding door.

A B

Closing the sliding door

Press [CD <] or [iPod <] again.

Keep fingers away from the sliding door when it is closing to avoid possible minor injuries.

Damage may occur if the sliding door is forced closed.

Be careful of CD hitting the sliding door while being removed.

The sliding door will not close if the docking switch lever is not returned to the original position.

[HC55] Open/Close sensor

With this function the sliding door can be opened without pressing a button. The sliding door will open or close by moving the palm of your hand over the sensors on the top of the unit.

For disc operations:

Place the palm of your hand over sensor B and then move it over sensor A.

To close the sliding door, place the palm of your hand over sensor A and then move it over sensor B.

For iPod/iPhone operations:

Place the palm of your hand over sensor A and then move it over sensor B.

To close the sliding door, place the palm of your hand over sensor B and then move it over sensor A.

ヰロヶヮユ

 

To change the setting of the open/close sensor

The sensitivity of the sensor can be changed to increase or decrease the activating area of the open/close sensor.

Press [OPEN/CLOSE SENSOR] repeatedly to select “MODE 1”, “MODE 2”, “MODE 3” or “OFF SENSOR”.

Select the mode that allows correct operation.

Factory preset: “MODE 2”

To turn the open/close sensor off, select “OFF SENSOR”.

To change the sound effect settings of the

ENGLISH

 

 

open/close sensor

 

1

Press [SOUND] repeatedly to select “BUZZER”.

 

2

Press [2] or [1] to select the following setting.

 

 

LOW:

Set the sound effect level to low.

 

 

 

 

MID:

Set the sound effect level to medium.

 

 

HIGH:

Set the sound effect level to high.

 

 

OFF:

Turn the sound effect off.

 

 

 

 

 

 

A red light is lit from the position of the sensor. This is normal.

The open/close sensor might be unintentionally activated if an object, hand, part of your arm, pets or children move over the top of the unit.

If the open/close sensor does not react, move the palm of your hand closer to the top of the unit and change the speed that you move your hand.

If the open/close sensor does not work, try changing the sensor’s setting. If it still does not work, open/close the sliding door using the buttons on the unit or the remote control.

When the sensor setting is changed to “MODE 1”, move your hand closer (approx. 3 cm (1 1/8")) over the unit.

The disc operation side of the sliding door will not open during CD playback or pause.

Disc operations

Inserting a disc

1Press [Í] to turn the unit on.

2Open the sliding door. (> left)

3 With the label of the disc facing towards you, tilt the disc into the disc tray under the sliding door.

4Place the disc onto the spindle in

the center and then push the disc down until it clicks into place.

≥ Make sure that the unit does not fall when inserting the disc.

5Close the sliding door. (> left)

Removing a disc

1Open the sliding door.

2Hold the center and the top right of the disc and pull the top right of the disc to unlock it from the spindle.

3Tilt the disc so as not to touch the sliding door or the lens and remove the disc.

RQTX1260

9