To adjust speaker level during play, H.Bass, Sound

HT545545WEn[HT545] Enhancing.bookPagethe29Friday,bass sound:March 31,20063:00PM

You can enhance low-frequency sound so that heavy bass sound can be

heard clearly, even if the acoustics of your room are not optimal. The unit

automatically selects the most suitable setting cording to the type of playing source.

Press [-H.BASS].
	ST	SRD E.
≥[DVD-V] [DVD-VR]		HDCD
		H.BASS
H.BASS ON (factory preset),------.H.BASS OFF		W PGM
		1
≥When another source is selected
H.BASS OFF (factory preset),------.H.BASS ON

The setting you make is retained, and recalled every time you play from the same type of source.

Adjusting the volume of each speaker: Speaker level adjustments

This is one of the ways to get appropriate surround effects.

Preparation

Press [DVD].

1	While stopped and no on-screen display is shown
	Press and hold [—TEST] to output a test signal.
	≥To stop the test signal, press and hold [—TEST] again.
	L: Front left	C: Center	R: Front right
	RS: Right surround	LS: Left surround
	≥There is no output from SW (subwoofer) channel.
2	Press [VOLUME, r] or [s] to set the volume level
	normally used for listening.
3	Press [3] (increase) or [4] (decrease) to adjust the
	speaker level for each speaker.

≥Adjust the speaker levels to the same level as the front speakers. C, RS, LS: `6 dB to i6 dB

∫To adjust speaker level during play

[Effective when playing multi-channel audio or when Dolby Pro Logic II or Sound Field Control (MOVIE, SPORT or MUSIC) is on.]

1 Press [CH SELECT] to select the speaker.		effects
L #C #R #RS #LS #SW		effects
L #C #R #RS #LS #SW
^-----------------------------------------------------	}
SW: Subwoofer		sound
≥“SW” does not appear on the display and is not adjustable		sound
≥You can adjust SW only if the disc includes a subwoofer
channel.
when “ÎPLII” is lit.		Using
≥“S” appears on the display when “MOVIE”, “SPORT” or		Using
≥“S” appears on the display when “MOVIE”, “SPORT” or

“MUSIC” is selected with Sound Field Control (➜ page 28).

In this case, you can adjust both surround speaker levels at the same time using [3, 4].

S: `6 dB to i6 dB

2Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker.

C, RS, LS, SW: `6 dB to i6 dB

(L, R: Only the balance is adjustable.)

≥To adjust the balance of the front speakers, while “L” or “R” is selected, press [2, 1].

RQT8654