Panasonic SC-HT545 manual AC mains lead connections, Simple Setup, HT545W

HT545545WEn.bookPage9Friday,March31,20063:00PPB				M	Scart cable
Other video connections for improved picture quality
S-VIDEO OUT					[Continental]Europe]
		Back of the			SCART
Television		main unit			Television	Back of the
(not included)		COMPONENTVIDEO OUT			(not included)	main unit
	S-vid o cable				AV
S-VIDEO		Y				AV
	(not included)
IN
		PR VIDEO	S-VIDEO		(not included)
		OUT	OUT
≥Using the S-VIDEO OUT terminal					≥Using the SCART (AV) terminal
The S-VIDEO OUT terminal achieves a more vivid picture than the					To improve picture quality, you can change the video signal output from
VIDEO OUT terminal by separating the chrominance (C) and luminance					the SCART (AV) terminal from “Video” to either “S-Video” or “RGB” to
(Y) signals. (Actual results depend on the television.)					suit the type of television you are using. Select “S-Video/YPbPr” or
					“RGB/No Output” from QUICK SETUP (➜ page 10).
					This connection will also enable you to play audio from your television

through your home theater system. Refer to “Operating other equipment” (➜ page 31).

∫Cable TV box or video cassette recorder connection

Cable TV box or video cassette recorder (not included)

Television

To your cable TV	RF IN	(not included)
service or television
antenna		RF IN		Audio cable (not included)	Back of the main unit
	RF OUT
		AUDIO	AUDIO	≥You can use the scart cable connection
						COMPONENTVIDEO OUT
		OUT	IN	(➜ above) instead of this connection.
						Y
	RF cable
		L			L
	(not included)
						PB
		R		Video cable	R
						PR VIDEO
					AUX		S-VIDEO
		VIDEO OUT	VIDEO IN	(included)		OUT	OUT

STEP5 AC mains lead connections

[HT545]	[HT545W]
1 AC mains lead	2 AC mains leads

Simple Setup

Audio and video connections/AC mains lead connections

Main unit		[HT545W]
		Wireless system
AC IN	To household mains socket
AC mains lead	To household mains socket
		AC IN~
		[HT545W]
		AC mains lead
Conserving power		[Note]
The main unit and the wireless system consume a small amount of		The included AC mains leads are for use with the main unit and wireless
power when they are in standby mode (main unit: approx. 0.5 W,		system only. Do not use them with other equipment. Also, do not use
wireless system: approx. 0.5 W). To save power when they are not to be		cords for other equipment with the main unit or wireless system.
used for a long time, unplug them from the household mains socket.
You will need to reset some memory items after plugging in the main unit.

RQT8654

9