Simple Setup
Preparing the remote control/Performing QUICK SETUP
HT545545WEn.bookPage10 | Friday,March31,20063:00PM | ≥attempt to recharge alkaline or manganese batteries. | |
STEP6 | Preparing the remote control | ||
|
|
| Do not: |
Remote control |
| Batteries | ≥mix old and new batteries. |
|
|
| ≥use different types at the same time. |
|
|
| ≥heat or expose to flame. |
|
|
| ≥take apart or short circuit. |
2 Insert so the poles (i and j) match those in the remote control. | ≥use batteries if the covering has been peeled off. | ||
3 |
|
| Mishandling of batteries can cause electrolyte leakage which can |
|
| severely damage the remote control. | |
|
|
| Remove the batteries if the remote control is not going to be used for a |
|
|
| long period of time. Store in a cool, dark place. |
|
| 1 ≥Do not use rechargeable type | ∫ Use |
|
| batteries. | Aim at the remote control signal sensor (➜ page 11), avoiding |
|
|
|
R6/LR6, AA | obstacles, at a maximum range of 7 m directly in front of the unit. |
|
STEP7 Performing QUICK SETUP
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).
≥To change your television’s video input mode, refer to its operating instructions.
≥This remote control can perform some basic television operations (➜ page 31).
DVD | 1 | Turn on the unit. |
|
| |
| 2 | Select “DVD/CD”. |
| 3 | Press and hold to show |
|
| the QUICK SETUP |
|
| screen. |
ENTER | 4 | Select Follow the messages |
RETURN | ||
|
| and make the settings. |
SETUP |
| Register |
|
|
| 5 | Press to finish QUICK | |
|
| ENTER | SETUP. |
|
|
|
|
| 6 | Press repeatedly to exit. | |
RQT8654 |
|
|
|
To change these settings later |
| ||
|
|
Select “QUICK SETUP” in the “Others” tab (➜ page 24).
10