Specifications (DIN 45 500)
nAMPLIFIER SECTION
RMS output power of each channel driven
(at 240 V for areas other than continental Europe)
10 % total harmonic distortion | ||
1 kHz front CH | ||
| ||
1 kHz surround CH | ||
| ||
1 kHz center CH | ||
| ||
100 Hz subwoofer CH | ||
Total RMS output power | ||
| ||
DIN power output: Dolby Digital Mode | ||
| ||
(at 240 V for areas other than continental Europe) | ||
T.H.D. 1% (Each channel driven) |
| |
1 kHz front CH | ||
| ||
1 kHz surround CH | ||
| ||
1 kHz center CH |
| 150 W per channel (4 Ω) |
100 Hz subwoofer CH |
| 160 W per channel (4 Ω) |
Total DIN output power |
| |
DIN power output: Stereo Mode |
| |
|
| |
(at 240 V for areas other than continental Europe) | ||
T.H.D. 1 % | ||
1 kHz front CH | ||
| ||
100 Hz subwoofer CH |
| 160 W per channel (4 Ω) |
Total DIN output power |
| |
Total harmonic distortion |
| |
| ||
Half power at 1 kHz (Front CH) |
| |
Input sensitivity |
| |
|
| |
DVD, DVR/VCR, TV, GAME/AUX |
| 400 mV, IHF’66 |
| ||
DVD, DVR/VCR, TV, GAME/AUX |
| 75 dB (85 dB, IHF’66) |
| ||
DVD, DVR/VCR, TV, GAME/AUX |
| 75 dB (85 dB, IHF’66) |
Input impedance |
| 47 kΩ |
DVD, DVR/VCR, TV, GAME/AUX |
| |
Tone controls |
|
|
BASS |
| 50 Hz, +10 to |
TREBLE |
| 20 kHz, +10 to |
|
|
|
Digital input OPTICAL |
| 2 |
COAXIAL |
| 1 |
|
|
|
n VIDEO SECTION |
|
|
Output voltage at 1 V input (unbalanced) | 1±0.1 | |
Maximum input voltage |
| 1.5 |
Input/output impedance |
| 75Ω |
n FM TUNER SECTION |
|
|
Frequency range |
| |
Sensitivity |
| 1.5 µV/75 Ω |
S/N 30 dB |
| |
S/N 26 dB |
| 1.3 µV/75 Ω |
S/N 20 dB |
| 1.2 µV/75 Ω |
IHF usable sensitivity |
| (IHF’58) 1.5 µV/75 Ω |
IHF 46 dB stereo quieting sensitivity | 22 µV/75 Ω | |
Total harmonic distortion |
|
|
MONO |
| 0.2 % |
STEREO |
| 0.3 % |
S/N |
|
|
MONO |
| 60 dB (71 dB, IHF) |
STEREO |
| 58 dB (65 dB, IHF) |
Frequency response |
| 20 |
Image rejection at 98 MHz |
| 40 dB |
IF rejection at 98 MHZ |
| 70 dB |
Stereo separation (1 kHz) |
| 40 dB |
Antenna terminal |
| 75 Ω (unbalanced) |
n AM TUNER SECTION |
|
|
Frequency range |
| |
Sensitivity | ||
| 450 µV/m | |
Selectivity (at 999 kHz) |
| 35 dB |
n SPEAKER SECTION |
|
|
Front speaker
Type[SC-HT17] 2 Way, 3 Speakers,
Speaker unit |
| 6 Ω | |
Full range | |||
| 4 | Ω | |
Super tweeter | Ω | ||
| Ω | ||
Input power (IEC) | |
Output sound pressure level | |
Crossover frequency | |
7 kHz | |
Frequency range | |
| 90 |
| |
Dimensions (W x H x D) | 90 |
260 x 1172 or 1233 x 269 mm | |
Mass | |
| |
Surround speaker | |
Type | 2 Way, 2 Speaker, |
Speaker unit | 8 cm cone type, 4 Ω |
Full range | |
6 cm Ring Shaped Dome type, 4 Ω | |
Piezo type, 4 Ω | |
Input power (IEC) | 70 W (Max) |
Output sound pressure level | |
Crossover frequency | |
Frequency range | |
| 90 |
| |
Dimensions (W x H x D) | 95 |
| |
Mass | |
| |
Center speaker | |
Type | 2 Way, 3 Speakers, |
Speaker unit | 6.5 cm cone type x 2, 4 Ω |
Full range | |
6 cm Ring Shaped Dome type, 4 Ω | |
6 cm cone type, 4 Ω | |
Input power (IEC) | 260 W (Max) |
Output sound pressure level | 82 dB/W (1.0 m) |
Crossover frequency | 5 kHz |
Frequency range | |
| 140 |
| |
Dimensions (W x H x D) | 140 |
320 x 84 x 95.5 mm | |
Mass | 1.4 kg |
Active subwoofer | |
Type | 1 Way, 2 Speaker, |
Speaker unit (Woofer) | |
Output sound pressure level | |
Frequency range | |
| 38 |
| |
Dimensions (W x H x D) | 45 |
| |
Mass | |
n GENERAL | |
| |
Power supply
For the United Kingdom, Australia and New Zealand
For continental Europe | AC |
|
|
AC 230 V, 50 Hz |
|
| |
Power consumption |
|
|
|
|
|
| |
(Main unit) | 25 W |
|
|
(Subwoofer) |
|
| |
Power consumption in standby mode: | Reference | ||
1 W | |||
Dimensions (W x H x D) (Main unit) | 430 x 63 x 260 mm |
|
|
Mass (Main unit) |
|
| |
|
|
| |
|
|
|
|
|
|
|
|
Notes:
1.Specifications are subject to change without notice. Mass and dimensions are approximate.
2.Total harmonic distortion is measured by the digital spectrum analyzer.
For main unit
Marking sign is located on bottom of the unit.
RQT7953
27
