Panasonic SC-HT17 Speaker setup, Step, Front and surround speaker assembly, Supplied, accessories

1	Speaker setup
Step

Step 1

Supplied	Speaker stands with long cables	Speaker stands		Stand bases
	SC-HT17 (x 2)		(x 2)		(x 4)
accessories		SC-HT17		SC-HT17
		SC-HT15	(x 2)	SC-HT15	(x 2)

Front and surround speaker assembly

•To prevent damage or scratches, lay a soft cloth and perform assembly on it.

•For assembly, use a Phillips-head screwdriver.

1 Attach the pipe to the base.

Speaker setup

1

2

Thread the speaker cable through the base.

•Untie the cable before threading.

Insert the pipe.

Match the holes.

3 Secure the pipe to the base.

Small screws (included)

Ensure the screws are securely fastened by lightly tightening the left and right side screws alternately until fully tightened.

The supplied stands are specially designed for use with this unit’s speakers.

Only use as indicated in this setup.

2 Attach the stand to the speaker.

SC-HT17Before attaching, check the speaker label.

•SB-FS930:Use as front speakers. Attach the stands with the short cables.

•SB-FS880:Use as surround speakers. Attach the stands with the long cables.

Large screws (included)

Speaker height

Front Speakers

Try to line up the middle of the speakers with the middle of the television.

Surround speakers

It is usually better to position the surround speakers a little higher.

RQT7953

4

You can also attach to the upper rear of the speaker.

Ensure the stand is fastened on straight by lightly tightening the top and bottom screws alternately until fully tightened.

•There is no difference between the right and left speakers.