Panasonic SC-HT17 Connect the speaker cables to the subwoofer, Other speaker setup options

2 Connect the speaker cables to the subwoofer.
									Subwoofer
		SC-HT17
									Step 1
Copper		SC-HT15							setup
Silver									Speaker
FRONT (L)	1						4	SURROUND
								(R)
		6 Ω		4 Ω		4 Ω
	2	FRONT		SURROUND		CENTER	3
FRONT (R)								SURROUND
								(L)
Copper							5		Note
Silver								CENTER	Never short-circuit positive (+)
									and negative (–) speaker wires.
		2	1	4	3	5
		R	L	R	L

Other speaker setup options

Attaching to a wall

180 mm

SC-HT15

Surround speakers

Fitting optional speaker stands

SC-HT15Surround speakers

5 mm, Pitch 0.8 mm

60 mm

30 - 35 mm

7.5 - 9.4 mm

Wall or pillar

174 mm

Speaker stands (not included)

Plate thickness +7 to 10 mm

7 - 9 mm	Screw
3.0 - 4.0 mm	(not included)

•The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when attaching the speakers to wall. Improper attachment may result in damage to the wall and speakers.

•When mounting the speakers to walls, use a string (not included) to prevent them from falling (è page 6).

•(SC-HT17 front and surround speakers, SC-HT15 front speakers) Use of optional speaker cables are recommended when mounting. (You can also remove the speaker cables from the pipes supplied with this system.)

•	Observe the diameter and length of the
	screws and the distance between screws
	as shown in the diagram.
•	The stands must be able to support over
•	10 kg.	RQT7953
	The stands must be stable even if the

speakers are in a high position.

7