Picture
Picture distorted. | ≥Some distortion is normal during SEARCH. |
|
|
No picture. | ≥Ensure that the television is connected properly. 8 |
| ≥Make sure the television is on. |
| ≥Ensure the television’s video input setting (e.g., VIDEO 1) is correct. |
The picture shown on the | ≥Go to the Video menu in the SETUP screen, and change “TV Aspect” to suit your television. You |
television is not normal. | may also need to change the screen mode on the television itself. 9 H |
(The sides of the picture are cut | ≥Ensure that the unit is connected directly to the television, and is not connected through a video |
off or black bands appear at the | cassette recorder. |
top and bottom of the screen.) |
|
|
|
Picture quality is poor. | ≥Check the settings in the |
The picture on the television | ≥The location and orientation of the antenna are incorrect. If you are using an indoor antenna, |
disappears or stripes appear on | change to an outdoor antenna. M |
the screen. | The television antenna wire is too close to the unit. Separate the antenna wire of the television |
| from the unit. |
|
|
Listening to the radio |
|
Noise is heard.
The stereo indicator flickers or doesn’t light.
Sound is distorted.
A beat sound is heard.
A low hum is heard during AM broadcasts.
≥Adjust the position of the FM or AM antenna. 8 ≥Use an outdoor antenna. M
≥Turn the television off or separate it from the unit.
≥Separate the antenna from other cables and cords.
Unit displays
This unit’s display is off. | ≥Press [FL DISPLAY] to turn the display on. G |
|
|
|
|
|
|
“NO PLAY” | ≥You inserted a disc the unit cannot play; insert one it can. 5 |
|
|
“NO DISC” | ≥You haven’t inserted a disc; insert one. |
|
|
| ≥You haven’t inserted the disc correctly; insert it correctly. ; |
|
|
|
|
|
|
“F61” | ≥Check and correct the speaker cord connections. 7 |
|
|
| If this does not fix the problem, there is a power supply problem. Call |
|
|
“DTS NO AUDIO” | ≥This unit is unable to decode DTS signals. |
|
|
|
|
|
|
“DTS CD” | ≥This unit is unable to decode DTS signals. |
|
|
“DVD U11” | ≥The disc is dirty. Wipe it with a soft cloth. 5 |
|
|
| |||
|
|
|
|
“ERROR” | ≥Incorrect operation performed. Read the instructions and try again. |
|
|
“DVD H∑∑” | ≥Trouble is likely to have occurred. The number following “H” depends on the status of the unit. |
| Reference |
| Reset procedure: |
| |
|
|
| |
∑∑ stands for a number. | Press [Í] to switch the unit to the standby mode and then back to ON. Alternatively, press [Í] to |
|
|
| switch the unit to the standby mode, disconnect the AC power supply cord, and then reconnect it. |
|
|
| ≥If the service numbers fail to clear, note the service number and contact a qualified service person. |
|
|
|
|
|
|
“TAKE OUT DISC” | ≥A problem has occurred with the tray mechanism. The tray will open automatically. Take out the |
|
|
| disc and close the tray. The unit will make the disc changing noises for a few moments and then |
|
|
| should operate normally. |
|
|
Television displays |
|
|
|
No
The disc’s menu is displayed in a different language.
≥Go to Display in the SETUP menus, and select “On” for
≥Press [3, 4] while the rightmost icon is highlighted to move them down. @
≥Go to Disc in the SETUP menus, and select the preferred language for “Menus”. H
Maintenance
To clean this unit, wipe with a soft, damp cloth. |
|
≥Never use alcohol, paint thinner or benzine to clean this unit. |
|
≥Before using chemically treated cloth, read the instructions that came with the cloth carefully. | 31 |
|
RQT6191