Panasonic SC-HT740 HT740 HT743, 8582En p03-13.fmPage4Friday,March3,20062 09PM, Simple Setup

Simple Setup

8582En_p03-13.fmPage4Friday,March3,20062:09PM
STEP1 Assembling the front speakers	The supplied stands are specially designed for
	front speakers. Use only as indicated in this setup.
	attachment to Panasonic SB-FS740 or SB-FS940

Preparation

≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it. ≥For assembly, use a Phillips-head screwdriver.

≥Make sure you have all the indicated components before starting assembly, setup, and connection. ≥There is no difference between the right and left speakers and stands.

≥For optional wall mount, refer to page 6.

[HT740] [HT743]

2 Front speakers	2 Stands	2 Bases	8 Screws
(with cover plate)	(with cable)

Assembling the front speakers

1 Attach the stand to the base.

1Thread the speaker cable through the base.

For quicker threading, loosely fold the cable in half (do not crease), pass the folded portion through the hole, and then pull the rest of the cable through the base.

Cable

Base

2Attach the stand to the base while gently pulling on the end of the speaker cable.

Stand

3

4

Attach the speaker to the stand.

1 Pull out the end of	Ridges
the speaker cable
and position it
between the ridges.

Cable

Stand

2Attach the speaker to the stand.

	Cover plate
Speaker	Remove before attaching
	the speaker and keep for
	wall-mount use (➜ page 6).

Stand

Secure the speaker to the stand.

Base

Cable

Pull gently.

2 Secure the stand to the base.

Speaker
	Screw
	Tighten securely.
Stand	Ensure the speaker cable is
	centered in the groove.

5 Connect the speaker cable.

Screw

Tighten securely.

Stand

Base

	RQT8582
4	Screws
	Tighten securely.

Slide the speaker cable into the groove.

Insert the wire fully.

_: White

`: Blue

Push!

Press the speaker cable

into the groove.